Government Scientific Source

Cytiva, now with the life sciences business from Pall Corporation, is a global biotechnology leader dedicated to helping customers discover and commercialize the next generation of therapeutics. Cytiva brings dedicated technical expertise and a broad portfolio of tools, technologies, and services that enable the development, manufacture, and delivery of transformative medicines to patients.

FILTER PRODUCTS BY

In Stock

Covid-19 Items

Made in USA

Life Science

Diagnostic Reagents, Stains, and Standards

Dyes and Stains and Indicators

Tissue Processing Reagents

Clinical Controls Calibrators and Standards

Clinical Chemistry Standards

$0~$10(3)
$10~$25(6)
$25~$50(18)
$50~$75(25)
$75~$100(35)
$100~$200(111)
$200~$300(101)
$300~$400(61)
$400~$500(44)
$500~$750(58)
$750~$1000(44)
$1000~$5000(140)
$5000~$10000(31)
$10000~$50000(41)
$50000~$100000(6)
$100000~$3000000(8)

Additives

With: -glutamine, HEPES

With: L-glutamine

With: L-glutamine, glucose Without: Sodium pyruvate

With: L-glutamine, sodium bicarbonate

With: L-glutamine, sodium pyruvate

Without: L-glutamine

Without: Calcium, magnesium

Antibiotic Spectrum

Broad spectrum antibacterial and antifungal

Broad Spectrum, active against gram negative and gram positive bacteria

Additional Assays

Gamma GlobulinAlkaline PhosphataseLactate DehydrogenaseSGPTSGOTpHTotal ProteinAlbuminBlood Urea NitrogenCreatinineTotal BilirubinSodiumPotassiumCalciumChlorideInorganic PhosphorusOsmolalityIronTIBCPercent Iron SaturationGlucoseIgG

InsulinGamma GlobulinAlkaline PhosphataseLactate DehydrogenaseSGPTSGOTpHAlbuminBlood Urea NitrogenCreatinineTotal BilirubinSodiumPotassiumCalciumChlorideInorganic PhosphorusIronTIBCPercent SaturationGlucoseIgG

ProgesteroneInsulinCholesterolHDLLDLTriglyceridesGamma GlobulinPhospholipidsAlkaline PhosphataseLactate DehydrogenaseSGPTSGOTB1B2B6NiacinBiotinRetinolCaroteneTocopherolB12FolateVitamin C1,25-dihydroxy vitamin DpHTotal ProteinAlbuminBlood Urea NitrogenCrea

Lactate DehydrogenaseSGPTSGOTpHTotal ProteinAlbuminBlood Urea NitrogenCreatinineTotal BilirubinSodiumPotassiumCalciumChlorideInorganic PhosphorusOsmolalityIronTIBCPercent SaturationGlucoseIgGGamma Globulin

Application

Western blotting

Routine HPLC/UHPLC analysis. Composite assays. Content uniformity. Protein precipitation. Solubility testing. Dissolution testing. Sample filtration. Use with any compound that requires protection from light, such as catecholamines or vitamins.

Epifluorescence microscopy Environmental analysis Cell biology EPA testing Fuel testing Bioassays Parasitology Air analysis Water microbiology

Industrial applications: analytical chemistry, research

Purification of recombinant proteins tagged with Strep-tag® II and Twin-Strep-tag®

Used for a wide variety of analytical routine applications in different industries like food testing (e.g., determination of fat content) or removal of carbon dioxide and turbidity from beverages (e.g., beer analysis).

Western, Southern and Northern Blotting

Application_4

Cell expansion

Centrifugation

Cell isolation

Chromatography system|Manual

Bead type

Mag Sepharose Magnetic Beads

Bed Dimensions

1.6 x 2.5 cm

16 x 100 mm

16 x 25 mm

26 x 600 mm

Bed Volume

5 mL

Binding Capacity

162-180 µg IgG/cm²

115-125 µg IgG/cm² (incubation method) 11-43 µg BSA/cm² (incubation method)

150-176 µg IgG/cm² (incubation method) 20-72 µg BSA/cm² (incubation method)

120-150 µg IgG/cm² (incubation method)

248-286 µg IgG/cm²

27 mg human IgG/ml gel

Average sample loading capacity

50 mg

Bed Height

100 mm

25 mm

Capacity

4.0 ml

Up to 100 mL

Autosampler Injection

No (optional)

Capture modes

SNOW detection mode, auto with pre-capture, manual, and time series

Basis Weight

155

Bed Height With One Adaptor

179 mm-209 mm

Binder

Inorganic binder

Binding Capacity/ml Chromatography Medium

At least 10 mg histidine-tagged protein

Binder Type

Binder free

Capacity

Up to 200 mL

Capacity Max.

0.4

Capacity per Rack Max

175 Tubes (12 mm)

Certifications/Compliance

Manufactured in cGMP (21 CFR 820) compliant and ISO9001 certified facilities

CCD

8.3-megapixel high-resolution Peltier-cooled CCD

Certifications/Compliance_16

Manufactured in cGMP (21 CFR 820) compliant and ISO9001 certified facilities

Chromatography technique

Affinity coupling

Histidine-tagged protein purification

Antibody affinity chromatography

Group specific affinity

GST-tagged protein purification

Chemical Stability (Column Hardware)

Resistant to most solutions used in liquid chromatography except hydrocarbons, aromatic solvents, and chlorinated hydrocarbons.

COLOR

White

Blue

Column i.d.

26 mm

Column volume

1 mL

Controlled using

External computer WindowsÂ® 10 Enterprise (IoT) or Pro

Color

Colorless

Translucent

Diameter

150 mm

47 mm

90 mm

Dimensions_1

20 x 25 cm

18 Ã— 24 cm (7.1 Ã— 9.5 inches)

20 x 40 cm

150mmx4m

200mmx4m

200x200mm

300mmx4m

Dimensions_29

150mmx4m

200mmx4m

200x200mm

20 x 40 cm

300mmx4m

18 Ã— 24 cm (7.1 Ã— 9.5 inches)

20 x 25 cm

300 Ã— 360 Ã— 575 mm (W Ã— H Ã— D)

Dimensions_33

18 Ã— 24 cm (7.1 Ã— 9.5 inches)

20 x 40 cm

300mmx4m

150mmx4m

200mmx4m

200x200mm

20 x 25 cm

Estimated Shelf Life from Manufacture Date

12 months

18 months

Filtration Area

4.2

Filtration Speed (Herzberg)

Approx. 140

Flow Rate

< 100 ml/min, 10 ml/min when emptying completely

< 4 mL/min

1-5 ml/min|1-5 ml/min

< 20 ml/min|< 20 ml/min

130 mm/30 min

5 mL/min|5 mL/min

Recommended: 0.5 to 2.0 mL/min

< 10 ml/min|< 10 ml/min

For Use With

Biacore 8K+, Biacore 8K, Biacore T200, Biacore S200, Biacore 4000, Biacore X100, Biacore 3000, and Biacore C SPR systems

For Use With AKTA start

Fraction collector F9-T

SDS-PAGE

Biacore T200, Biacore S200, Biacore 3000, and Biacore C SPR systems

Standard microcentrifuge.

ReadyToProcess WAVE 25

Description name

Defined Fetal Bovine Serum, US Origin

Format

Circles

DIGE approved

Endotoxin Concentration

< 0.005 EU/mL

â‰¤ 0.05 EU/mL

â‰¤ 10 EU/mL

â‰¤ 25 EU/mL

Flow Direction

Flow should enter from the inlet

Supported bidirectionally. Certain applications may require orientation, i.e., vents. Reverse flow only for low pressure applications.

Bidirectional

Format

Liquid

Format_6

Kits

Prepacked columns

Bulk resin

Circles

Prepacked column

Dimensions

200x200mm

47 mm

200mmx4m

300mmx4m

Equivalent in size to 12 x 32 mm vials

Exposure Time

1/100 s to 10 h

Frequency

50/60 Hz

Gel Dimension

180 x 3 x 0.5 mm

110 x 3 x 0.5 mm

70 x 3 x 0.5 mm

Field of view

160 Ã— 220 mm

Filtrate Vessel Material

Polycarbonate (PC)

Flow Rate [Delta p equals 0.9 bar]

2.2 s/100 ml/12.5 cm²

Flow Velocity

< 300 cm/h|< 300 cm/h

10 cm/h - 50 cm/h

< 150 cm/h|< 150 cm/h

For Membrane Butler

For use with1

AKTA avant and AKTA pure systems

Grade

Grade 105 [Sheets]

Grade 597

Characterized

Defined

Grade B-2

3MM Chr

603 g

Grade 2122

Grade 2V

Grade 520b

Grade QM-A

Specialty filtered

802

Grade 597 Â½

Grade 609

Grade GMF 150

Grade Type

Folded (Prepleated)

Standard

Grid Color

Black

Plain

Grid Dimension

3.1

Guidance

Strip length: 11 cm Instruction supplied with the gel

Strip length: 7 cm Instruction supplied with the gel

Tube length: 50-180 mm

Fitting 1/16" in PEEK

*The wetted parts are resistant to organic solvents and salt buffers commonly used in chromatography of biomolecules, except 100 % Ethyl acetate, 100 % Hexane and 100 % Tetrahydrofuran.

2x Cassette for 15 ml tubes

2x Cassette for 3 ml tubes

2x Cassette for 50 ml tubes

For location of tubing please refer to Flow path scheme and Tubing description under the Product Support tab.

Instructions and specification supplied with the buffer

Length 2 m

Manifold material: Ceramic

Place the sleevs on drive bushing to prevent bowl slippage

Prepacked 96-well plates, packed with Sephadex G-25 resin for clean-up of proteins/oligosaccharides, sample volumes up to 130ÂµL in parallel, 96-well filter plates by centrifuge, large sample series and automation. Instructions supplied with the plates

Specification supplied with the buffer

Storage: Room temperature, maximum 20Â°C, without any contact with heat and radioactive sources. The film can also be stored at 4Â°C

The kit contains 2x Seal 2x O-ring 21.4x1.6 mm 2x O-ring 3x1 mm 2x Rinsing house Old membrane replaced by 28-9536-55

The kit contains 10 x filter 2 x Support screen *The wetted parts are resistant to organic solvents and salt buffers commonly used in chromatography of biomolecules, except 100 % Ethyl acetate, 100 % Hexane and 100 % Tetrahydrofuran.

The wetted parts are resistant to organic solvents and salt buffers commonly used in chromatography of biomolecules, except 100 % Ethyl acetate, 100 % Hexane and 100 % Tetrahydrofuran.

To connect the air sensor use: Tubing i.d. 1.6 mm o.d. 1/8" Tubing connector 1/8" with Ferrule 1/8" Adapter for air sensor

Tubing i.d. 0.5 mm o.d. 1/16" fitted with fingertight connectors 1/16". *The wetted parts are resistant to organic solvents and salt buffers commonly used in chromatography of biomolecules, except 100 % Ethyl acetate, 100 % Hexane and 100 % Tetrahydrof

Tubing i.d. 0.75 mm o.d. 1/16" fitted with fingertight connectors 1/16". *The wetted parts are resistant to organic solvents and salt buffers commonly used in chromatography of biomolecules, except 100 % Ethyl acetate, 100 % Hexane and 100 % Tetrahydro

Water-resistant phosphorimaging plate, 20x25 cm, high resolution

Water-resistant phosphorimaging plate, 20x25 cm, multipurpose

When ordered separately the connectors are black.

Carrier for high resolution isoelectric focusing (IEF)

Connection: 5/16" male For 1/8" o.d. tubing

Dialysis of small sample volumes, up to 2 ml for 50 samples

Dialysis of small sample volumes, up to 250 Î¼l for 50 samples The kit contains 50 x Tube with dialysis cap 50 x Standard cap 6 x Float Instructions

Dialysis of small sample volumes, up to 250 Î¼l for 50 samples The kit contains 50 x Tube with dialysis cap 50 x Standard cap 6 x Float

Dimension: 14x16 cm

FR-902 is pre-set to 0.2 MPa and is used when using low pressure columns and/or when the pH electrode is mounted in the pH flow cell.

o.d. 0.7 mm

Optical flow path length: 10 mm

Phosphorimaging plate, 20x25 cm, for Tritium detection

Strip length: 18 cm Instruction supplied with the gel

The kit contains:
1 x 25 Âµl sample loop i.d. 0.5 mm
1 x 50 Âµl sample loop i.d. 0.5 mm
1 x 100 Âµl sample loop i.d. 0.5 mm
1 x 200 Âµl sample loop i.d. 0.8 mm
1 x 500 Âµl sample loop i.d. 0.8 mm
Each sample loop consists of tubing

The set includes 5 x Filter 5 x Support screen Outer diameter 15 mm *The wetted parts are resistant to organic solvents and salt buffers commonly used in chromatography of biomolecules, except 100 % Ethyl acetate, 100 % Hexane and 100 % Tetrahydrofu

Total width = 10 cm Well width = 2.9 mm Sample volume/1 mm depth = 2.9 Âµl

Tris = (tris(hydroximethyl)aminoethane)

Tubing and connectors have to be ordered separately.

Tubing i.d. 1.0 mm o.d. 1/16" fitted with Fingertight connectors 1/16".

Hemoglobin Concentration

â‰¤ 10 mg/dL

â‰¤ 20 mg/dL

â‰¤ 25 mg/dL

Hold-up Volume of Membrane

<10 Î¼l

<20 Î¼l

<5 Î¼l

Housing

Pigment Free Polypropylene (PP)

Polycarbonate (PC)

Polypropylene (PP)

Hydrophobic

Yes

Heat Inactivate

Yes

Height

145 mm

629 mm

660 mm

322 mm

875 mm

Grade

Grade 589/3

Group To be Coupled

Primary amines

Immunogen

Mouse Ig, whole molecule

Mouse IgG

Hold-Up Volume

30 Âµl

Humidity

20% to 70% (no dew condensation)

Hydrophilic

Yes

Image Output

Gray scale 16-bit .TIF, color Image .JPG, gray scale .JPG

In-line Reference Subtraction

Automatic

Includes

1 x Cleaning brush 2 x Electrode assembly 1 x Spirit level 20 x Sample cup 1 x Sample cup insertion tool 60 x Paper electrode wicks 60 x Paper bridge pads 1 x Manifold 1 x Forceps 1 x 60 ml cleaning solution and User Manual

10 sensor chips

10 x Net ring 10 x Support screen

1 Ã— Column stand 4 Ã— PD-10 spin adaptor 1 Ã— Buffer tray 30 Ã— Bottom sleeve Instructions are supplied with the columns

2.5 m optical fibre

Biacore X100 Plus Package software; in-line degasser; handbook.

ECL DualVue Markers (125 Âµl) and S-protein-HRP (50 Âµl).

Loop valve kit V9-L
PEEK tubing i.d. 0.5 mm/o.d. 1/16''
Fingertight connectors 1/16''

Inlet Valve V9-IA
FEP Tubing ID1.6mm
Connector 5/16" male for 1/8" o.d. tubing
Yellow ferrule

Instructions supplied with the concentractors

Nytran SPC, wicks and blotter stacks for five transfers from indicated gel size.

Outlet Valve V9-O
ETFE Tubing ID1.0mm
Fingertight connectors 1/16''

Outlet Valve V9H-O
FEP Tubing ID1.6mm
Connector 5/16" male for 1/8" o.d. tubing
Yellow ferrule

Versatile valve V9-V

Support rod/P-1, 2 each silicone tubing 1 mm, 2.1 mm, 3.1 mm i.d., 6 tubing connectors, flow rate guide, Allen key 3 mm, O-ring fuse and fuse.

1 Filter Heater

1 sensor chip

1 x Tubing i.d. 0.75 mm o.d. 1/16" L =0.28 m, 1 x Tubing i.d. 0.75 o.d. 1/16" L = 0.18 m, 2 x Union 1/16" female-M6 male, 4 x Fingertight connectors 1/16" supplied with the superloop The parts can be ordered separately, please refer to spare parts

1 x Tubing i.d. 0.75 mm, o.d. 1/16", L =0.28 m 1 x Tubing i.d. 0.75 mm, o.d. 1/16", L = 0.41 m 2 x Union 1/16" female-M6 male 4 x Fingertight connectors 1/16" supplied with the superloop

Biacore 8K instrument, roller table, waste container, 2 Ã— licenses for Biacore Insight Evaluation Software (including Biacore 8K Control Software), 2 Ã— licenses for Extended Screening and Characterization Extension

Dismantling tool, support screen, net ring (10 Î¼m), O-ring, stop plugs, and instructions.

Fill port, needle and syringe holder.

Inlet Valve V9-IB
FEP Tubing ID1.6mm
Connector 5/16" male for 1/8" o.d. tubing
Yellow ferrule

Inlet Valve V9H-IA
FEP Tubing ID 2.9 mm
Connector 5/16" male for 3/16" o.d. tubing
Blue ferrule

Inlet Valve V9H-IB
FEP Tubing ID 2.9 mm
Connector 5/16" male for 3/16" o.d. tubing
Blue ferrule

Installation instructions and port positioning label

Installation instructions, PEEK tubing

Loop valve kit V9H-L
PEEK tubing i.d. 0.75 mm/o.d. 1/16''
PEEK tubing i.d. 1.0 mm/o.d. 1/16''
Fingertight connectors 1/16''

One fill port

pH Valve V9H-pH
Tubing kit for V9H-pH
Dummy pH electrode

pH Valve V9-pH
Tubing kit for V9-pH
Dummy pH electrode

Tube rack 40 x 30 mm, bowl, tube support, holder and guide

Tube holder and guide

Tube rack 175 x 12 mm, bowl, tube support, holder and guide

Tube rack 95 x 10-18 mm.

Inlet Connector

Female luer lock

Stepped barb for 10 to 12 mm (3/8 to 1/2") tubing

Stepped barb for 6 to 10 mm (1/4 to 3/8") tubing

Inner Diameter

0.25 mm (0.009 in)

0.5 mm (0.019 in)

0.75 mm (0.03 in)

0.3 mm (0.011 in)

2.1 mm (0.082 in)

0.150 mm (0.006 in)

0.5 mm (0.02 in)

0.75 mm (0.029 in)

1 mm (0.039 in)

28 mm

1.6 mm (0.062 in)

3.1 mm (0.122 in)

33 mm

Input Voltage

100 to 240 V

Injection valve

1/16â€ PEEK valve 6 port 2 position with 0.25 mm i.d. bore

1/16â€ PEEK Valcoâ„¢ valve, 6 port 2 position, with 0.75 mm i.d. bore

Injections per vial/well

Max. 9

Inlet id

0.75 mm (0.029 in)

1.0 mm (0.04 in)

Input Amount

1-1000 cells or 1fg-10ng of input DNA

Interleaving Paper

Yes

Ion exchanger

Q (anion exchanger)

S (cation exchanger)

Item Description

Calf Serum; Cosmic Calf; 1000 mL

Heat Inact.; 100 mL; Available as quote

100 mL

500 mL

Liquid modified medium with L-glutamine, glucose, and HEPES; without sodium pyruvate; 500 mL bottle

Kit Contents

1 sensor chip for maintenance procedures.

1 vial, 250uL. Supplied ready to use in 305% glycerol and sample buffer containing mercaptoethanesulphonic acid (MESNA) as reducing agent. Sufficient for 25 standard SDS PAGE gel loadings or 50 mini-gel loadings. High-range rainbow markers (Mr 12 000 to 2

1 x Support rod, 1 x Silicon tubing i.d. 1 mm, 2 x Silicon tubing i.d. 2.1 mm, 2 x Silicon tubing i.d. 3.1 mm, 6 x Tubing connectors, 1 x Flow rate guide, 1 x Allen key 3 mm 1 x O-ring 45 x 2 mm (EPDM,are supplied with the pump.

Aprotinin (10 mg): 6500 M_r
Ribonuclease A (50 mg): 13 700 M_r
Carbonic anhydrase (15 mg): 29 000 M_r
Ovalbumin (50 mg): 43 000 M_r
Conalbumin (50 mg): 75 000 M_r
Blue Dextran 2000

Room-temperature stable beads containing ~ 2.5 units of recombinant PuReTaq DNA polymerase, dATP, dCTP, dGTP, dTTP, stabilizers, BSA and reaction buffer. When a bead is reconstituted to a 25 Î¼L final volume, the concentration of each dNTP is 200 Î¼M in10

Thyroglobulin: 76 Âµg, 669000 (Mr), porcine thyroid (source), Reference: 12
Ferritin: 50 Âµg, 440000 (Mr), equine spleen (source), Reference: 13
Catalase: 36 Âµg, 232000 (Mr), bovine liver (source), Reference: 14
Lactate dehydrogenase: 48 Âµg,

BIAtest solution, with HBS-EP, 65 mL
BIAnormalizing solution, (40% (w/w) glycerol), 30 mL.
BIAnormalizing solution, 30 mL (70% (w/w) glycerol) (to be used with Biacore 3000 SPR system).
BIAdesorb solution 1, 90 mL
BIAdesorb solution

Ovalbumin (50 mg): 43 000 M_r
Conalbumin (50 mg): 75 000 M_r
Aldolase (50 mg): 158 000 M_r
Ferritin (15 mg): 440 000 M_r
Thyroglobulin (50 mg): 669 000 M_r
Blue Dextran 2000 (50 mg

Phosphorylase b: 67 Âµg, 97000 (Mr), rabbit muscle (source), Reference: 6 Albumin: 83 Âµg, 66000 (Mr), bovine serum (source), Reference: 7 Ovalbumin: 147 Âµg, 45000 (Mr), chicken egg white (source), Reference: 8 Carbonic anhydrase: 83 Âµg, 30000 (Mr), bov

RNAspin Lysis Solution (Red sticker): 125 ml, RNAspin Wash Buffer I (Yellow sticker): 80 ml, RNAspin Wash Buffer II (Grey sticker): 3 Ã— 25 ml Add 100 ml Ethanol to each bottle; RNAspin Desalting Buffer (Blue sticker); 125 ml, RNAspin Desalting Reaction B

1 x Filter holder 1 x Filter 1 x Support screen

2'-Deoxyadenosine 5'-Triphosphate Solution; 2'-Deoxycytidine 5'-Triphosphate Solution; 2'-Deoxyguanosine 5'-Triphosphate Solution; 2'-Deoxythymidine 5'-Triphosphate Solution

750 mg 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride (EDC), 115 mg N-hydroxysuccinimide (NHS), 10.5 ml 1.0 M ethanolamine-HCl pH 8.5

Pre-Stained Indicator Proteins Phosphorylase b: 50 Âµg, 100000 (Mr), rabbit muscle (source) Myoglobin: 50 Âµg, 16000 (Mr), horse muscle (source) Lysozyme: 50 Âµg, 15000 (Mr), chicken egg white (source) ECL DualVueTM Western blotting markers: 125 Âµl S-p

The kit contains 15 ml Precipitant 17.5 ml Coprecipitant 50 ml Wash buffer 250 Î¼l Wash additive Quick reference card Instructions

The kit contains a complete set of tubing for AKTA avant 25 and Inlet/Outlet Tubing tag kit for AKTA avant 25.

1x Support net 1x Filter (mounted on a fliterholder) 1x Screw lid and cap membrane

BIAdesorb solution 1, 500 mL
BIAdesorb solution 2, 500 mL

BIAtest solution with HBS-N, 65 mL
BIAnormalizing solution, 90 mL
BIAdesorb solution 1, 2 x 95 mL
BIAdesorb solution 2, 2 x 95 mL
HBS-N buffer 10X, 50 mL
Sensor Chip Maintenance
Note: Due to the Biocidal Products Regulatio

RNAspin Lysis Solution (Red sticker): 25 ml, RNAspin Wash Buffer I (Yellow sticker): 15 ml, RNAspin Wash Buffer II (Grey sticker): 12.5 ml Add 50 ml Ethanol; RNAspin Desalting Buffer (Blue sticker); 25 ml, RNAspin Desalting Reaction Buffer (Green sticker)

Single Cell GenomiPhi Reaction buffer 1 x 275 Âµl, Single Cell GenomiPhi Enzyme mix 1 x 25 Âµl, Single Cell GenomiPhi Amplification mix 1 x 25 Âµl, Single Cell GenomiPhi DTT Solution 1 x 100 Âµl, Single Cell GenomiPhi Lysis buffer 1 x 100 Âµl and Single C

Labelling Chemistries

Thiol groups

Length

2 m

100 mm

5 m

104 mm

140 mm

3 m

License type

Workstation fÃ¶r AKTA pure, pilot, process, ReadyToProcess WAVE 25

DoE concurrent license

Dry license without DVD

UNICORN Package for Academia

Evaluation classic

Remote license without DVD

Standalone evaluation

License type_3

Dry license without DVD

UNICORN Package for Academia

DoE concurrent license

Remote license without DVD

Standalone evaluation

Workstation fÃ¶r AKTA pure, pilot, process, ReadyToProcess WAVE 25

Evaluation classic

Lifetime

<0.3 ns

1 ns

Ligand Density

~16-23 Âµmol NHS/ml drained medium

~ 5 mg/mL resin

2 mg Protein G/ml medium

Ligand_7

Protein L

Protein A

Protein A, alkali stabilized

Protein G

Light Source

Epi-UV: 360 nm Epi-White: 470 to 656 nm

Epi-UV: 360 nm Epi-White: 470 to 656 nm Trans-White

Epi-blue: 460 nm Epi-green: 535 nm Epi-red: 635 nm Epi-IR short: 660 nm Epi-IR long: 775 nm Epi-UV: 360 nm Epi-white: 470 to 656 nm

Lens Model

Fujifilm F 0.74

Licensing

For licensing information, see the Licensing Statements page in the About Us section.

For licensing information, see the Licensing Statements page in the About Us section. https://www.gelifesciences.com/legal/licensing-statements

Ligand

Iminodiacetic acid

N-hydroxysuccinimide

N-hydroxysuccinimide (NHS) activated

Native Protein A

Protein G

Strep-Tactin XT

Glutathione

Recombinant protein G lacking albumin-binding region, produced in E. coli

Ligand Coupling Method

Cyanogen bromide activation

Epoxy activation

Material

Acetal plastic (POM) Fluoro rubber Polypropylene (PP)

Fluoroethenepropene (FEP) Polyetheretherketone (PEEK)

High-quality cotton linters

Hostacom G2NO2

Polycarbonate (PC)

Polyethertherketone (PEEK)

Polypropylene (PP) Titanium Alloy (Ti alloy)

Polytetrafluoroethene(PTFE)

Borosilicate glass Polyetheretherketone (PEEK) Perfluor rubber (PFR) Nitrilebutadiene rubber (NBR)

Borosilicate glass

Cellulose Acetate

Ethylene propylene diene (EPDM) Perfluorrubber (PFR) Ultra high molecular weight polyetheylene (UHMWPE)

Ethylenepropylenediene (EPDM)

Ethylenetetra fluoroethylene (ETFE)

Etylenetetra fluoroethylene(ETFE) Polypropylene (PP)

Lid: Polypropylene (PP) Membrane: Ethylenepropylenediene (EPDM)

Mixed Cellulose Ester (MCE)

Natural Polypropylene (PP)

Polypropylene

Polypropylene (PP)

Polystyrene (PS)

Titanium (Ti) Chlorotrifluoroethylene (CTFE)

Acetal plastic (POM) Fluor carbon rubber (FPM) Polypropylene (PP)

Acetal plastic (POM)

Cellulose

Cellulose Nitrate

Clear Polystyrene

Ethylenetetra fluorethylene (ETFE)

FFKM, Fully fluorinated perfluoroelastomer PEEK, Polyetheretherketone Stainless steel

Fluoro rubber

Fluoroethenepropene (FEP)

Borosilicate glass Ethylene propylene diene (EPDM) Polyetheretherketone (PEEK) Polytetrafluoroethylene (PTFE)

Borosilicate glass fibers

Kraton G (SEBS)

Ethylene propylene diene (EPDM) Polyetheretherketone (PEEK)

Ethylenetetra fluoroethylene (ETFE), Titanium (Ti)

Ethylenetetrafluoroethylene (ETFE)

FluorinatedPropylene Monomer (FPM FKM) PolyEtherEtherKetone (PEEK) Polypropylene (PP) PolyTetraFluorEthylene (PTFE)

Perfluorrubber (PFR) Polyetheretherketone (PEEK) Stainless steel Titanium (Ti) Polytetrafluoroethene (PTFE)

High-purity quartz (SiOâ‚‚)

Injection fillingport:Ethylenetetra fluoroethylene (ETFE) Titanium (Ti)

Polyethylene (PE)

Polyoxymethylene (POM-C)

Nitrocellulose (NC)

Polytetrafluoroethylene (PTFE)

PVDF

PEEK

Poly Vinyl Chloride (PVC)

Polyester (PE)

Polyester (PE) thin cold sealing film

Polyetheretherketone (PEEK) PolyImide (PI) Polytetrafluoroethene (PTFE) Silica

Polyetheretherketone (PEEK) Polytetrafluoroethene (PTFE)

Polyetheretherketone (PEEK) Polytetrafluoroethylene (PTFE) Titanium alloy (Ti alloy) Glass

Polyetheretherketone (PEEK)

Polyetheretherketone(PEEK)

Silicone

Stainless steel

Polyvinylidene Difluoride (PVDF)

PTFE

Reinforced Nitrocellulose (NC)

Self-adhesive transparent plastic

Support net and filter: Polypropylene (PP) Filter holder: Titanium (Ti)

Titanium (Ti)

Tubing: Silicone Rubber Tubing connector: Acetal Plastic (POM) Polypropylene (PP) Fluoro Rubber

Linearity

Â± 5% within 0â€“2 AU

Matrix

Composite of cross-linked agarose and dextran

4% cross-linked agarose

Cross-linked agarose, 4%, spherical

Highly cross-linked agarose, 6%

Agarose, 4%

6% Cross-Linked Agarose

Composite of cross-linked agarose

Hydroxypropylated, cross-linked dextran

Matrix

Paramagnetic, spherical, highly cross-linked agarose particles

4% Agarose

Rigid, cross-linked agarose, spherical

Max recommended temperature

550 Â°C

800 Â°C

Max power

250

Maximum pressure over packed bed

4.0 MPa (40 bar, 580 psi)

Indicator

Litmus Red

Inhibitor

100 mM ZnCl2 (< 50% inhibition); 100 ÂµM chymostatin; 4 mM Pefabloc

Injection Volume

1 to 200 Î¼L

Injection volume1

Programmable from 0 to 19 999 ÂµL, 1 ÂµL increments. Injection volume depends on sample loop.

Programmable from 0 to 5000 ÂµL 1 ÂµL increments. Maximum injection volume depends on installed sample loop and injection mode

Melting/Freezing Point

204-207Â°C

170Â°C

Inner diameter

Inner Packaging

Individual film envelopes

Single film bag

Interface

12.1-inch high-resolution built-in touch screen

Membrane Area

20 x 25 cm

Membrane Type

ME 26

TE 38

ME 24

Plain

Metal Ion Capacity

54 to 70 Âµmol Ni²⁺/ml medium

30-37 Âµmol Cuâ‚‚â‚Š/ml

Irradiated With Lid

Min Pressure for Seal Movement

1 bar [0.1 MPa] (14 psi)

Mains Requirement

Processing unit: Autorange voltage 100 to 240 V~, frequency 50/60 Hz

Material

Nitrocellulose

Molecular Weight Detection

No lower limit for organic molecules

Mycoplasma

Yes

Material Compliance

All materials pass USP Class VI test for plastics

Multi-Step Purification

Yes, (optional)

Multiple Sample Injection

Yes, up to 7 samples

Upgradeable to 5 samples

Multiple Wavelength Detection

Up to 3 wavelengths

Yes, up to 3 wavelengths

Fixed wavelength

Nominal Basis Weight

145

Nominal Thickness

475

750

190

210

Operating Flow Rate, Recommended

0.075 mL/min

0.75 mL/min

0.80 mL/min

0.50 mL/min

Operating Pressure Max

20 bar (2 MPa) (290 psi)

20 MPa (2900 psi)

250 bar (25 MPa) at 0.001 to 10 ml/min (3625 psi at 0.001 to 10 ml/min)

40 bar (4 MPa) (580 psi)

50 bar (5 MPa) (725 psi)

6.9 bar (100 psi)

4.5 bar (65 psi)

10 bar (1 MPa)

5.2 bar (75 psi)

1 bar (15 psi)

200 bar (20 MPa, 2900 psi)

4.1 bar (60 psi)

4.1 bar - Capsule (60 psi)

5 MPa (725 psi)

Operating Temp Max

130Â°C

80ÂºC

100Â°C

80Â°C

130

Operation

Fully automated (auto exposure, no focus, adjustment or calibration needed)

Order code

1842-047

SH30080.03

SH30096.FS

SH30243.FS

SH30255.FS

SH30521.02

SH30529.02

SH30538.02

SH30023.FS

SH30068.03

SH30081.FS

SH30087.03HI

SH30200.FS

SH30558.02

SH30605.01

SH30021.FS

SH30022.LS

SH30027.FS

SH30243.LS

SH30271.01

SH30529.FS

SH30541.02HI

SH30574.02

SH30858.02

SV30079.01

SH30022.FS

SH30023.01

SH30074.02

SH30087.04

SH30096.LS

SH30109.02

SH30228.FS

SH30538.FS

SH30538.LS

SH30541.02

SH30541.03

SV30082.01

Order Information

Custom options of the product are available. Please contact your local sales representative or Technical Support to request. Larger pack sizes available on request.

HiLoad columns are prepacked XK columns.

Instruction supplied with the column.

Store at -15Â°C to -30Â°C.

The tubing kit can be ordered separately, please refer to Related Products.

Additional pack size available on request, please inquire.

Contains sensor chip parts in Serie S and classic formats.

Disposable columns for clean-up of proteins/oligosaccharides. The columns are prepacked with Sephadex G-25 resin and for sample volumes up to 2.5 mL by gravity flow and columns spin flow. PD- 10 Buffer reservoir has to be ordered separately For smaller s

Includes six default cassettes for fractionation: four cassettes for 50 mL tubes and two cassettes for 15 mL tubes. Also comes with three different mixers ( 1.4, 5 and 15 mL) and a complete set of inlet and outlet tubing.

Not for use in denaturing (urea) systems.; Store at 4Â°C.

Unopened vials should be stored at 4Â°C.

Use 20-40 mM imidazole in sample and binding buffers for highest purity.

Highly species-specific.

Includes two default cassettes for fractionation. Up to six cassettes can be placed in the fraction collector for full capacity. Note, AKTA avant is not for use with fraction collector Frac-950. For ordering information, please contact your local GE Healt

ReadyToProcess WAVE 25 requires a CBCU, UNICORN software and a Tray 10, Tray 20, or Tray 50

This product is produced based on a customer order. Delivery time may be longer than for standard products.

Caps are not required for Biacore 4000

Contains ECL DualVue markers (125 Âµl) and S-protein-HRP (50 Âµl)

Custom formulation, testing, packaging, and labeling are available.

For research use only.

General screening agent.

Not for use with ultrasalt-sensitive automated DNA Sequencers (e.g. ALFexpress II and ABI 377 model.)

Order E. coli BL21 separately.

Origin

U.S.

Canada

USDA

Outer Diameter

1.58 mm (0.06 in)

10 - 50 mm

1/16"

10-21 mm

1.58 mm (1/16 in)

25 mm (0.98 in)

3.18 mm (1/18 in)

Outlet Connector

Male slip luer

Stepped barb for 10 to 12 mm (3/8 to 1/2") tubing

Stepped barb for 6 to 10 mm (1/4 to 3/8") tubing

Male luer

Pack Size

Pack size

1 Ã— 5 mL

1 mL

10 mL

100 sheets

200 mL

25 mL

25 reactions

4 x 50 mL

4 x 500 Î¼l

50 columns

50 sheets

500 g

6 Ã— 500 mL

6 x 500 mL

1 Ã— 100 mL

1 mg

1 roll

100 g

100 nmol

100 pieces

1000 mL bottle

1000 pieces

150 pieces

20 columns

25 Âµmol

25 nmol

250 Î¼l

30 columns

4 x 25 Âµmol

400 caps

50 mL

500 mL

600 caps

1 Ã— 120 mL

1 piece

1/pk

10 pieces

100 mL

1000 caps

16 columns

20 mL

250 preps

5 Ã— 5 mL

50 preps

50 samples

500 units

6 x 100 mL

For 3 000cmÂ² membrane

1 kit

1 L

100/PK

1000 mL

15 g

2 mL

25 loadings

5 Ã— 1 mL

5 pieces

50 pieces

500 Âµl

6 x 1000 mL

For 2 500 cmÂ² membrane

Particle Retention in Liquid Max

Particle Size in Methanol Min

Noise

< 0.1 mAU

Nominal Air Flow Rate

21 s/100 mL/inÂ²

1.6 s/100 ml/inÂ²

6.3 s/100 ml/inÂ²

Nominal Ash Content

0.01%

Number of Tests

Quantities sufficient for 25 standard gel loadings

Quantities sufficient for use with 50 minigels (10 Ã— 8 cm) or 25 large gels (20 Ã— 20 cm).

Operating Conditions

ambient temperature range 15Â°C to 32Â°C humidity range 20% to 80% (noncondensing)

Operating Flow Rate, Max

1.50 mL/min, water at room temperature;
0.75 mL/min, 20% ethanol at room temperature;
0.75 mL/min water at low temperature;
0.35 mL/min 20% ethanol at low temperature

1.60 mL/min, water at room temperature;
0.80 mL/min, 20% ethanol or 10% glycerol at room temperature;
0.80 mL/min water at low temperature;
0.40 mL/min 20% ethanol or 10% glycerol at low temperature

0.15 mL/min, water at room temperature;
0.075 mL/min, 20% ethanol or 10% glycerol at room temperature;
0.075 mL/min water at low temperature;
0.035 mL/min 20% ethanol or 10% glycerol at low temperature

1.2 mL/min, water at room temperature;
0.60 mL/min, 20% ethanol or 10% glycerol at room temperature;
0.60 mL/min water at low temperature;
0.30 mL/min 20% ethanol or 10% glycerol at low temperature

1.80 mL/min, water at room temperature;
0.90 mL/min, 20% ethanol or 10% glycerol at room temperature;
0.90 mL/min water at low temperature;
0.45 mL/min 20% ethanol or 10% glycerol at low temperature

Operating time

Lamp: > 10 000 h

pH Monitoring

0â€“14

0 to 14

0 to 14 (optional)

pH Range

11-Jun

5.5â€“7.5

8 - 10.5

8-May

11-Mar

7.2 - 9.0

14-Jan

6 - 8.1

6.5-8.5

7-Apr

10-Mar

5 - 10.5

pH Stability Cleaning-in-Place (CIP)

0 to 14

1 to 14

pH Stability Long Term

43843

pH stability, CIP

2â€“14

4â€“13

2â€“10

2â€“13

2 (ligand dependent)â€“13 (ligand dependent)

Osmolality

288-310 mOsm/kg

Medium Suspensions in Total Volumes

500 Î¼l

Outlet id

0.75 mm (0.029 in)

1.0 mm (0.04 in)

Physical State

Solid

solution

Liquid

3.5-9.3

5.2-10.25

Pore Size

0.45

0.6

5 Âµm

0.1

0.1 Âµm

0.2 Âµm

1.6 Âµm

0.2

0.2Î¼m

0.45 Âµm

1 Âµm

Porosity

10 or 80 Âµm

7 Î¼m

10 Î¼m

Power Consumption

1500 VA

300 VA

800 VA

Max 20 VA

Processing unit: max 350 VA

Power requirements

95 to 240 Volt AC Â± 10%; 50 to 60 Hz; 200 VA

Partical Size Dry

18 Âµm-111 Âµm

Particle Size in Methanol Max

163

Particle size, d_50V

~90 Âµm

~90 Î¼m

34 Âµm

~ 9 Âµm

~ 8.6 Âµm

Pressure Limit

2 MPa

Pressure/Flow Specification

80-150 cm/h, pressure drop cm H2O/bed height=15, bed height 10 cm, column 5 cm i.d.

base matrix 70-140 cm/h, pressure drop cm Hâ‚‚O/bed height=15 cm, bed height 10 cm, 5 cm i.d.

25-45 cm/h, pressure drop cm H2O/bed height=2, beh height 30 cm, 2.6 cm i.d.

Base matrix: 150-250 cm/h, 100 kPa, XK 50/60 column, bed height 25 cm

Base matrix: 250-400 cm/h, 100 kPa, XK 50/60 column, bed height 25 cm

Processing

None

Heat Inactivated

6.5 - 7.5

7.0 to 7.2

5.0 to 7.0

pH Stability Short Term

1(<1 day exposure)â€“14(<1 day exposure)

1â€“14

pH stability, operational

2 to 12Â

2â€“13

pH 6 to 10

2 to 12

2â€“12

3â€“9

2â€“9

3 to 12

3â€“13

4â€“13

Porosity Min

66%

74%

Prefilter

Prefilter Material

100% Borosilicate Glass Fiber GMF 150 10 Âµm: 1 Âµm GF/F 0.7 Âµm

No Prefilter

PP 20 Âµm : 5 Âµm

100% Quartz fiber

Molar Extinction Coefficient

250000 M^-1 cm^-1

150000 M^-1cm^-1

Properties

Ficoll-Paque PLUS is a sterile, ready-to-use density media containing Ficoll PM400, sodium diatrizoate and disodium calcium EDTA. The density has been optimized for the isolation of human lymphocytes from peripheral blood.

Medium to slow, wet strength, thin, creped

Very fast, wet strength, extra thick

Fast

Green Lines at 5mm intervals

Very slow, very dense

Ficoll-Paque PREMIUM products constitute a range of sterile, ready-to-use density media containing Ficoll PM400, sodium diatrizoate and disodium calcium EDTA in water for injection (WFI). The densities and osmolalities of the different products have been

Medium fast

Slow-medium

Protein Binding

Medium

Pump Type

Piston pump, metering type

Quantum Yield

>0.15

>0.28

Quantum Yield in Methanol

> 0.15

> 0.28

Number of Ports

Reagent type

Antibodies

Fluorescent Labeling Reagents

Operating System

Microsoft Windows 7 Professional SP1 (x32 or x64 bit) (Note: Computer and OS is not included with the purchase of UNICORN)

Microsoft Windows 7 Professional SP1 (x32 or x64 bit) Microsoft Windows 10 (x64 bit) (Note: Computer and OS is not included with the purchase of UNICORN)

Operating Temperature

<40Â°C

0Â°C-40Â°C

18Â°C to 28Â°C

4Â°C-35Â°C

4Â°C-40Â°C

Recommended Membrane

PVDF (Amersham Hybond P) or nitrocellulose (Amersham Protran)

PVDF (Amersham Hybond P) or nitrocellulose (Amersham Protran Premium)

Purity

> 99% triphosphate

â‰¥99,8%

â‰¥ 98% triphosphate

Parameter

2-D Clean-Up Kit

Particle Size

45 Âµm-165 Âµm

45 Î¼m-165 Î¼m

Refractive Index

1.33 to 1.39

Relative Humidity

10%-95% (non condensing)

20%-95% (non condensing)

20% to 95% (noncondensing)

pH Gradient

Linear

Nonlinear

Resin Type

MabSelect

Sepharose High Performance

Capto

Rocking Rate

2 to 40 rocks/min

Pixel Correction

Dark frame correction, flat frame correction, distortion correction, and blue shift

Porosity Max

84%

77%

Power

100 to 240 V, ~ 50 to 60 Hz

Run Time

A few hours to overnight

Number of Gels

43842

Number Of Wells

Safety Certifications

2006/42/EC (MD), 2004/108/EC (EMC), 1999/5/EC (R&TTE)

Sample Loading Volume

Determined by desired degree of resolution [Adsorption Mode], ~2% total bed volume [Molecular Sizing], ~1% total bed volume [Partition Mode]

Sample loop

10 mL

Default 100 ÂµL

Pressure/flow characteristics

Pressure/flow characteristics: 150-250 cm/h at <0.1 MPa in a XK 50/60 column with 5 cm diameter and 25 cm bed height (at 20â°C using buffers with the same viscosity as water).

Sample Volume

<= 13 ml

4 to 50 ÂµL

600 Î¼l

< 1 mL

< 150 Âµl

< 100 Âµl

<= 5 ml

Up to 3.2 mL

25 to 500 ÂµL

Operating Temp

Room temperature

Operating temperature1

4 Â°C to 40 Â°C; indoor use only

Sample Volume Max

2 ml

5 ml

150 ml

Sample Volume Min

1 ml

Injection volume plus 20 to 50 Î¼L (application dependent)

Sampler capacity

Two Vial racks of 12 vials each for 10 mL vials. Maximum vial height 47 mm. Minimum vial height 32 mm.

Vial rack with 108 positions for (1.5 mL). Microplates according to SBS standards. 96-well (deep-well and standard) as well as 384-well

Sealing

Heat-fused

Select Product

Circles, Ã˜ 82 mm

0.5 ml Tubes, 100 Reactions

Shelf Life

12 months

24 months

18 Months

Range_11

Full

High

Low

Solubility

Insoluble in cold and hot water

Partially soluble in cold water, hot water and methanol, very slightly soluble in acetone, insoluble in diethyl ether

Soluble in cold water and hot water, methanol

Easily soluble in cold water and hot water

Product Size Avg

>10kb

Stability

Ficoll-Paque PREMIUM products are provided as sterile solutions which are stable for at least 3 yr when stored between 4Â°C and 30Â°C and protected from light. Deterioration of Ficoll-Paque PREMIUM products is indicated by the appearance of a yellow color

This product has been designed to deliver high quality results for up to 12 months from the manufacturing date. Please refer to the expiration date on the product label.

Sterilization

0.2 Âµm sterile filtered

Autoclave at 121ÂºC (131ÂºC max)

Autoclave at 121ÂºC (131ÂºC max) at 1 bar (15 psi) for 20 minutes

May be autoclaved at 121Â°C for 20 minutes. Multiple autoclave cycles are possible. However, the responsibility for reuse is with the operator. The device should be protected from cross contamination. An integrity test should be performed after autoclavin

0.1 Âµm sterile filtered

Autoclavable

0.1 Âµm sterile filtered

Sterilization Method

Filtered through sequential 100 nm pore-size rated filters; Gamma Irradiated.

Filtered using sequential 100 nm pore-size rated filters.

Filtered through sequential 40 nm pore-size rated filters.

Filtered through three sequential 100 nm pore-size rated filters.

Filtered through sequential 100 nm pore-size rated filters.

Storage

-10Â° to -20Â° C

15Â° to 30Â° C

2 to 8Â°C, 20% Ethanol

2Â° to 30Â° C

4Â°C to 30Â°C, 20% ethanol

+2 - +8Â°C, 20% Ethanol

2 - 30Â°C, 20% Ethanol

2 to 8Â°C

20 to 25Â°C, Double distilled water containing 0.05% Kathon CG/ICP Biocide as preservative

20 to 25Â°C, TE buffer (10 mM Tris/HCl, 1mM EDTA) containing 0.05% Kathon CG/ICP Biocide as preservative.

4 to 30Â°C

4 to 30Â°C, 0.2 M sodium acetate in 20% Ethanol

4 to 30Â°C, 20% Ethanol

4 to 8Â°C, 100% Isopropanol

2Â° to 8Â°C, away from light

Sera should be stored at -10Â°C or lower. Once thawed, sera should be stored at 2Â° to 8Â°C.

Storage Conditions

10 - 30Â°C

18 - 30Â° C

2 - 8Â°C, protected from light. Reconstituted material may be stored for up to 2 weeks at -20Â°C in aliquots to avoid repeat freeze thaw cycles.

4 - 8Â°C, 2-propanol, 20% medium slurry

At room temperature. Precipitation can occur at low temperature.

Store all products at +2Â°C to 8Â°C except BIAdesorb solution 1, which should be stored at room temperature (SDS precipitates at low temperature).

Unopened vials should be stored at 4Â°C

2â€“8Â°C

4 - 30Â°C

4 - 8Â°C, 20% Ethanol, 20% medium slurry

-20Â°C

4Â°C

4ËšC to 30ËšC, 20% ethanol

Store at room temperature.

-15 to -30Â°C

2 - 8Â°C

2Â°C â€“ 8Â°C

4â€“30Â°C

Storage conditions1

-25 Â°C to 60 Â°C

Protection Class

IP 20

IP 21, wet side IP 22

IP 21

Resolution

0.001 mAU

Retentions

Aqueous solutions: up to 0.9 bar (14 psi) Particulates in air: 0.1 Âµm 99.99%

Rocking Angle

2Â° - 12Â°

Synonym

2-Amino-2-(hydroxymethyl)-1,3-propanediol, THAM, Tris base, Trometamol

Dodecyl sodium sulfate, Dodecyl sulfate sodium salt, Lauryl sulfate sodium salt, SDS, Sodium lauryl sulfate

Safety certifications1

CE, cMETus, EU ROHS, China ROHS

Scale

Lab|Process development

Lab

Lab|Process

Size

100 ml

500 mL

Range

Full

High

Low

Reaction Time

2 to 4 hours

Recommended maximum operational flow velocity

300 cm/h

Relative humidity1

20% to 80% RH

System

Sepax C-Pro|Sefia|Sepax 2

Xuri

Ribbon Filter Color

Blue

Sample Type

Small-molecule drug candidates to high-molecular weight proteins (also DNA, RNA, polysaccharides, lipids, cells, and viruses) in various sample environments (e.g., in DMSO-containing buffers, plasma, and serum)

Specialty Type

Charcoal/Dextran filtered

Sensitivity

For detection of high abundant proteins

Recognition Site

Thrombin

Sterility

Nonsterile

Tested for

BluetongueBovine AdenovirusBovine ParvovirusBovine RSVBVDVCytopathogenic AgentsHemadsorbing AgentsRabies VirusReovirus

Bovine AdenovirusBovine ParvovirusBovine RSVBVDVCytopathogenic AgentsHemadsorbing AgentsRabies VirusReovirus

Theoretical Plates

> 13000 m-1

> 43 000 m^-1

> 48 000 m^-1

Solvent Resistance

Medium

Source

Sheep

Stability

Stable

STERILITY

Sterile

Solubility

Soluble in cold water and hot water

Type

Reel

Roll

Pergamyne Paper

Ashless

Parchment Paper, â‰¤ 0.05% N

TYPE

Sheets

Support System

Polypropylene (PP)

Weight

40 g/mÂ²

39 kg

43 g/mÂ²

Up to 53

Sterile

Yes

Wetted Materials

Ethylenetetra fluoroethylene (ETFE)

Polyetheretherketone (PEEK)/ Fluorinated Ethylene Propylene (FEP)/ PolyChloroTriFluoroEthylene (PCTFE)

Polyetheretherketone (PEEK)/ Polytetrafluoroethene (PTFE)/ Ethylene TetraFluoroEthylene (EFTE)/ Fully Fluorinated Propylene Monomer (FFPM/FFKM)

Polyetheretherketone (PEEK)/Ethylenetetrafluoroethylene (ETFE)

Polyetheretherketone (PEEK)/Fluorinated Ethylene Propylene (FEP)

Polyetheretherketone (PEEK)/Fluoroethenepropene (FEP)/Ethylenetetrafluoroethylene (ETFE)

Polyetheretherketone (PEEK)/Polytetrafluoroethene (PTFE)

Poly vinyl chloride (PVC)

Polyetheretherketone (PEEK)

Borosilicate glass Polyetheretherketone (PEEK) Perfluor rubber (PFR) Nitrilebutadiene rubber (NBR)

Silicone

Wetted part1

PEEK, PTFE, Tefzelâ„¢, Vespelâ„¢, PCTFE, glass. Needle coated with silica on stainless steel SS316 (inside and outside)

Width

860

535

Syringe volume

500 ÂµL standard; 2500 ÂµL optional

Systems

Xuri

Typical Thickness

180

Total Time of Preparation

< 30 min/6 preps

Vent

On inlet

Voltage

100-120/220-240 VAC

100 to 120/220 to 240 VAC

Voltage Variation

+/- 10%

Volume

400 Âµl - 2 ml

5-20 ml

8 Î¼l

2 mL

100-500 Âµl

Volume_28

400 Âµl - 2 ml

100-500 Âµl

5-20 ml

Well Format

96-well

With Pad

UV Wavelength

190-700 nm

Wetted Part

yes

Typical Pressure Drop Over the Packed Bed

~ 3 MPa

USDA Safety Testing Included

USDA Inspected

Weight_30

21 kg

If you are viewing this page as a nonregistered user, the price(s) displayed is list price. To view your customer-specific pricing, log in or become a registered user here.