Government Scientific Source

$0~$10(0)
$10~$25(1)
$25~$50(194)
$50~$75(42)
$75~$100(18)
$100~$200(72)
$200~$300(51)
$300~$400(20)
$400~$500(31)
$500~$750(37)
$750~$1000(23)
$1000~$5000(65)
$5000~$10000(2)
$10000~$50000(1)
$50000~$100000(0)
$100000~$3000000(0)

Absorbance

0.02 AU max. at 330nm

Additives

Without: Calcium, magnesium

Without: Calcium, magnesium, phenol red

Without: Phenol red

Aluminum Al

20 ppb max.

Appearance

white powder

Application_5

Chromatography system|Manual

Additional Information

Vapor Pressure: 0.55mbar at 20°C

Application

Cell isolation

For screening of selectivity, binding and elution conditions, as well as small scale purifications

For the removal and/or purification of serine proteases e.g. thrombin

Application_4

Cell isolation

Chromatography system|Manual

Assay Percent Range

>=99 %

99.8% min by GC

99.5% (Metals basis)

Applications

thin layer chromatography (TLC): suitable

Bed Height

100 mm

25 mm

30 mm

600 mm

Autoignition Temp

800 °F

Bed Dimensions

16 x 25 mm

16 x 100 mm

7 x 25 mm

Bed Volume

5 mL

320

Capacity

1.2 meq/mL by wetted bed volume

0.6 meq/mL by wetted bed volume

0.8 meq/mL by wetted bed volume

3.8 meq/mL by wetted bed volume

1.7 meq/mL by wetted bed volume

1.8 meq/mL by wetted bed volume

4.7 meq/g by dry weight

=1.1 meq/mL by wetted bed volume

1.3 meq/mL by wetted bed volume

Binding Capacity/ml Chromatography Medium

At least 10 mg histidine-tagged protein

>10 mg/mL

>Approx. 10 mg GST-tagged protein/mL resin

Calcium Ca

50 ppb max.

Boiling Point

2230 C

45-50 C/14 mmHg (lit.)

130-132 C (lit.)

189°C

CAS Registry Number 1

631-61-8

540-69-2

91000-53-2

67-68-5

7631-86-9

9004-34-6

Buffer

Running Buffers

CAS_NO

112926-00-8

1343-88-0

161308-36-7

17287-03-5

2042-27-5

373-57-9

112945-52-5

7631-86-9

25561-30-2

9003-70-7

9041-35-4

9050-97-9

39339-85-0

104219-63-8

11128-95-3

126850-14-4

1344-28-1

7647-01-0

77377-52-7

24589-78-4

9004-34-6

9004-54-0

9052-45-3

60177-39-1

62610-50-8

65099-79-8

685-27-8

69011-15-0

69011-19-4

110-85-0

15461-27-5

39389-20-3

63181-98-6

65546-95-4

69011-20-7

75-09-2

ChEBI

CHEBI:28262

CHEBI:62947

CHEBI:63050

Chemical Name or Material

Ammonium Acetate

Silica Gel 60

Cellulose

Dimethylsulfoxide

Silica Gel

Chem AlertStorageSymbol

Gray

Chemical Stability

Commonly used buffers, 0.2 M NaOH, 0.1 M HCl, 1 M acetic acid, 8 M urea, 6 M guanidine HCl, 1 % SDS, 20 % ethanol, 30 % propanol, 30 % acetonitrile, 0.5 M NaOH (only for cleaning-in-place), 2 M NaCl

Commonly used buffers, 0.2 M NaOH, 0.2 M HCl, 0.1 M acetic acid, 8 M urea, 6 M guanidine HCl, 24 % ethanol

Stable in all commonly used buffer systems

Stable in commonly used aqueous buffers - 1.0 M NaOH, 3 M Ammonium sulphate, 30% isopropanol, 70% ethanol, 10% ethylene glycol, 0.5% SDS, 6 M guanidine-hydrochloride, 8 M Urea

Commonly used aqueous buffers

Commonly used aqueous buffers, e.g. 1 M acetate, pH 6.0, 0.1 M NaOH, 70% ethanol or 6 M guanidine-hydrochloride for 1 h at room temperature

Stable in aqueous buffers commonly used in Protein G chromatography, 6 M guanidine hydrochloride pH 4.7, 20 mM sodium phosphate + 1% SDS, 70% Ethanol, 95% Ethanol, 20 mM Sodium phosphate, 100 mM Glycine- phosphoric acid, 6 M Urea, 20% ethanol + 2% hibitan

Stable to commonly used aqueous buffers:1.0 M NaOH, 8 M urea, 8 M guanidine hydrochloride, 70% ethanol

0.01 M HCl and 0.01 M NaOH (one week); 10 mM EDTA, 5 mM DTT, 1 M NaOH, 5 mM TCEP, 20 mM 1²-Mercaptoethanol, and 6 M guanidine-HCl (24 hours); 500 mM imidazole and 100 mM EDTA (2 hours); 30% 2-propanol (20 minutes).

Commonly used buffers, 0.2 M NaOH, 0.2 M HCl, 1 M acetic acid, 8 M urea, 6 M guanidine HCl, 1 % SDS, 24 % ethanol, 30 % porpanol, 30 % acetonitrile

Chemical Stability (Column Hardware)

Resistant to most solutions used in liquid chromatography except hydrocarbons, aromatic solvents and chlorinated hydrocarbons.

Stable in commonly used aqueous buffers, 1 M NaOH

Resistant to most solutions used in liquid chromatography except hydrocarbons, aromatic solvents and chlorinated hydrocarbons

Resistant to most solutions used in liquid chromatography except hydrocarbons, aromatic solvents, and chlorinated hydrocarbons

Chemical Substance ID

24852120

24854190

24896572

329750793

329752001

329759188

24854194

24857352

24852304

24854187

24854645

24857358

24863799

24865203

329759181

329763461

24898556

329770161

329817869

329756032

329759187

329763462

329768868

24852837

Assay

=99%

Assay Percent Notes

99% min

Chloride

0.0005% max.

5ppm max.

Chromatography technique

Hydrophobic Interaction Chromatography

Ion Exchange Chromatography

Antibody affinity chromatography

Antibody affinity chromatography.

Group specific affinity

GST-tagged protein purification

Histidine-tagged protein purification

Bead type

Mag Sepharose Magnetic Beads

Chemical/Physical Resistance

Swelling (dry to solvent saturated, %):hexane 10-15; toluene 10-15; ethylene dichloride 15-20; ethylene acetate 30-40; 95% ethylene alcohol 60-70; water 60-70.

Color

Gold/Brown

Colorless to Slightly Yellow

Column i.d.

6.4

Composition

nitrogen content, =1.0%

Disodium Hydrogen Phosphate, Sodium Chloride

Tris Base, Sodium Chloride

Concentration

20 X

3 M in methanol

~0.25 M in methanol

0.2M buffer soln.

10 X

Binding Capacity/Column

Approx. 40 mg histidine-tagged protein/ml medium

Color

colorless

BioProcess resin

yes

Column Type

Silica

COLOR

Blue

Content AndStorage

Store between 2 to 25°C in a dry, cool, well-ventilated area, away from incompatible materials.

Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, between the following temperatures: 20 to 25°C.

Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, between the following temperatures: 2 to 8°C.

Copper Cu

10 ppb max.

Decomposition Information

>180°C

>190°C

Carbon Content in Dry Residue

0.04-5.5%|0.04-5.5%

Concentration

3% in PBS

Density

1.547 g/mL at 25 °C

1.075 g/mL at 25 °C (lit.)

1.100g/cmÂ³

Description

1 Chr cellulose chromatography roll is a 0.18 mm paper for general analytical separations.

Density Max.

1.078 g/ml

1.2 g/ml

Content And Storage

Store at room temperature.

EC Number

215-691-6

231-545-4

211-680-5

215-681-1

238-878-4

232-674-9

246-331-6

EINECS Number

231-545-4

232-674-9

Empirical Formula

C3H10OS

C6H12F3NOSi

MgO3Si

C8H18F3NOSi2

C9H18F3NOSi

O2Si

HCl

Endotoxin Activity Max.

0.12 EU/mg

2 EU/ml

Estimated Shelf Life from Manufacture Date

3 years

5 years

Feature

ferrule type packed column

Fluorescent Indicator

Filtration Test

Pass Test

Flash Point

87°C (188.6°F)

Flow Rate

< 1 ml/min|< 1 ml/min

< 20 ml/min|< 20 ml/min

> 4 ml/min

>60 ml/min|> 60 ml/min

< 1.0 ml/min

< 10 ml/min|< 10 ml/min

< 20 mL/min |< 20 mL/min

>10 ml/min

>60 ml/min

1-4ml/min

2 ml/min - 10 ml/min|2 ml/min - 10 ml/min

< 20 mL/min

< 5 ml/min

< DarcyÂ´s Law

130 mm/30 min.

2 ml/min - 10 ml/min

< 4 mL/min

< 4 ml/min|< 4 ml/min

Flow Velocity

< 130 cm/h

< 130 cm/h|< 130 cm/h

< 300 cm/h

< 450 cm/h

< 450 cm/h|< 450 cm/h

< 600 cm/h|< 600 cm/h

â‰¤ 600 cm/h

< 150 cm/h at 25Â°C, HR 16/10 columns, 5 cm bed height

< 75 cm/h at 25 Â°C, HR 16/10 column, 5 cm bed height

< 300 cm/h, using XK 50/30 column with 15 cm bed height

< 300 cm/h|< 300 cm/h

< 60 cm/hour

<1800 cm/h

<1800 cm/h|< 1800 cm/h

10 cm/h - 50 cm/h

15 cm/h|15 cm/h

< 150 cm/h

For Use With

Biacore 4000, Biacore T200, Biacore T100, Biacore 8K, Biacore S200 and Biacore X100

For Use With Application

Column Chromatography

For General Analytical Separations

Dimensions LxW

4.0 cm x 100 m (1.57 in. x 328.0 ft.)

Exclusion Limit Small Organics

5 x 10Â³

Flashpoint (°C)

11 C

6 C

26 C - closed cup

Format

matrix material

Roll

Format_6

Prepacked columns

Prepacked column

Bulk resin

Formula

(C₁₀H₁₂· C₁₀H₁₀· C₈H₈)_x

(C₁₀H₁₂ · C₁₀H₁₀ · C₈H₈ · C₃

Al2O3

C₄H₁₀N₂

SiO₂

CH2Cl2

O2Si

C₉H₁₈F₃NOSi

CF₃CON(CH₃)Si(CH₃)₃

MgO₃Si

Service & Support

ZrOCl₂·xH₂O

Field14

50Â°-65Â°

Finish

Smooth

For Use With Equipment

Any Flash System

Form

powder or crystals

fine powder

powder

fine crystals

neat

Formula Weight

100.39

257.40

36.46

60.08

78.13

199.25

223.07

241.33

94.18

Certificate of Analysis

Yes

Certifications/Compliance

Manufactured in cGMP (21 CFR 820) compliant and ISO9001 certified facilities

Chem Alert Storage Symbol

Gray

Formula Weight

77.08

COLOR

White

Grade

High-Purity Grade

analytical standard

certified reference material

for GC derivatization

Standard

high-purity grade (Davisil Grade 643)

high-purity grade (Davisil Grade 923)

HPLC

Grade

Technical Grade

High-purity Grade (Davisil Grade 646)

Health Hazard 2

WARNING!

CAUTION!

GHS H Statement
H335

Exclusion Limit Peptides

4 x 10Â³

H-Codes

H372

H225-H314

H226 - H315 - H319 - H335

H319

H373

Health Hazard 3

Emergency Overview
Combustible liquid. DMSO readily penetrates skin and may carry other dissolved chemicals into the body. Hygroscopic. Use personal protective equipment. Keep away from open flames, hot surfaces and sources of ignition. Ensure

Form

Liquid

Format

Liquid

Gel Type

Tris-Glycine Gel

InChIKey

USFZMSVCRYTOJT-UHFFFAOYSA-N

VZTDIZULWFCMLS-UHFFFAOYSA-N

VYPSYNLAJGMNEJ-UHFFFAOYSA-N

FEGYIWVHCSRXCG-UHFFFAOYSA-M

IAZDPXIOMUYVGZ-UHFFFAOYSA-N

Includes

18 Pc.

Includes

2 Ã— 100 ml phosphate 8x stock solution (pH 7.4), and 100 ml highly pure 2 M imidazole (pH 7.4)

Dismantling tool, support screen, net ring (10 Î¼m), O-ring, stop plugs, and instructions.

Connectors for high- and low-pressure chromatography equipment and instructions.

Valco fittings for AKTAdesign systems and are supplied with M6 connectors for FPLC System.

Insoluble Matter

0.005% max.

Intrinsic Viscosity

~ 17

IOD-Codes

F,T

F,C

Ion Exchanger Type

Strong anion exchanger

Weak anion

Multimodal weak cation exchanger

Strong cation exchanger

Weak anion exchanger

Weak and strong anion

Weak cation exchanger

Ionic Capacity

0.07-0.09 mmol H⁺/ml medium

0.13-0.17 mmol/ml

0.18-0.24 mmol Cl^-/ml medium

0.09-0.13 mmol H⁺/ml medium

0.11â€“0.16 mmol (Cl^-)/mL resin

0.14-0.20 mmol Cl^-/ml

0.16-0.22 mmol Cl^-/ml medium

3-4 mmol/g

0.15-0.20 mmol H⁺/mlÂ

0.18-0.25 mmol H⁺/ml medium

0.29-0.35 mmol Cl^-/ml medium

IUPAC Name

azanium;formate

sodium;3-[[1,3-dihydroxy-2-(hydroxymethyl)propan-2-yl]amino]propane-1-sulfonate

dioxosilane

methylsulfinylmethane

azanium;acetate

Length Metric

100 m

L CMSGradientSuitability

Pass Test

Licensing

For licensing information, see the Licensing Statements page in the About Us section.

For licensing information, see the Licensing Statements page in the About Us section. https://www.gelifesciences.com/legal/licensing-statements

For licensing information, see the Licensing Statements page in the About Us section.

Ligand

Alkaline-stabilized protein A-derived (E.coli).

Bovine gelatin

Cibacron Blue

Glutathione and 10-carbon linker arm

Human IgG

Phenyl

Quaternary amine

Calmodulin

Native Protein A

Recombinant GammaBind G type 3 lacking albumin-binding region

Strep-Tactin XT

Alkali-stabilized Protein A-derived (E. coli)

Diethylaminoethyl

Glutathione

Recombinant protein G lacking albumin-binding region, produced in E. coli

Carboxymethyl

Porcine heparin

Sulphopropyl

Ligand Coupling Method

Cyanogen bromide activation

Epoxy activation

Triazine

Dextran surface extenders

Ether linkages

Ether linkages and hydrophilic spacer arm

Reductive Amination

Epoxy

Maleimide activation

Ligand Density

~ 5 mg/mL resin

~ 7 Î¼mol Cibacron Blue/ml medium

2 mg Protein G/ml medium

3 mg GammaBind G, type 3/ml medium

3 mg Protein A/ml medium

Approx. 13 Î¼mol/ml

4.5-8 mg gelatin/ml drained resin

Ligand_7

Butyl, octyl, phenyl

Protein A

Protein A, alkali stabilized

Protein G

Protein L

Lead Pb

10 ppb max.

Linear Formula

(CH3)3S(OH)

C9H18F3NOSi

(C10H12 · C10H10 · C8H8 · C3H9N)X

CF3CON(CH3)COCF3

CF3CON(CH3)Si(CH3)3

HCO2NH4

MgO3Si

(C10H12 · C10H10 · C8H8)x

(CH₃)₂SO

CF3C[=NSi(CH3)3]OSi(CH3)3

CH3COONH4

HCl

SiO2

Material

Glass Support

Polypropylene

Florisil

PEEK

Plastic/Stainless Steel

Alumina

Cellulose

N/A

Silica gel

silica gel matrix

Matrix

cross-linked agarose, 4%, spherical

Cross-linked agarose, 6%

Highly cross-linked agarose, 6%

Highly crossed-linked agarose, 6%

Composite of cross-linked agarose

Highly cross-linked agarose with dextran surface extender

Highly cross-linked agarose, spherical

Hydroxypropylated, cross-linked dextran

Agarose, 4%

Cross-linked agarose, 4%

cross-linked agarose, 6%, spherical

Cross-linked copolymer of allyl dextran and N,N'-methylene bisacrylamide.

Cross-linked dextran

agarose, 6%, spherical

Composite of cross-linked agarose and dextran

cross-linked, 6% agarose particles

Highly cross-linked 6% agarose

Highly cross-linked agarose

MDL Number

MFCD00005953

MFCD00011232

MFCD00075347

MFCD00132705

MFCD00132770

MFCD00145586

MFCD00145842

MFCD00148280

MFCD00149897

MFCD00165824

MFCD00166483

MFCD00011324

MFCD00211881

MFCD00677124

MFCD00071635

MFCD03098973

MFCD00084428

MFCD03791384

MFCD00132707

MFCD00132718

MFCD00132726

MFCD00132771

MFCD00145831

MFCD03096474

MFCD00000411

MFCD00008269

MFCD00078249

MFCD00081512

MFCD00132701

MFCD00135579

MFCD00145841

MFCD00000412

MFCD00009671

MFCD00132712

MFCD00132722

MFCD00216756

Matrix

6% Cross-Linked Agarose

Rigid, cross-linked agarose, spherical

Highly cross-linked agarose, spherical.

Highly cross-linked 4% agarose

Melting Point

18.4°C

115°C

114°C

MFCD Number

MFCD00011232

MFCD00013066

MFCD00069903

MFCD00081512

Iron Fe

10 ppb max.

5ppm max.

Metal Ion Capacity

~15 Âµmol Ni²⁺/ml medium

approx. 15 Âµmol Ni²⁺/ml medium

54 to 70 Âµmol Ni²⁺/ml medium

Molecular Formula

C2H7NO2

O2Si

C2H6OS

C7H16NNaO6S

CH5NO2

Molecular Weight

150.13

241.33

266.36

36.46

60.08

60.083

101.96

94.18

84.93

99.85

78.129

100.39

199.25

257.40

77.083

86.14

60.08

0.0

178.13 (anhydrous basis)

265.256

63.056

Ligand Concentration

~45 Âµmol phenyl/mL resin

~4mg heparin/mL resin

~25 Âµmol phenyl/mL resin

4.5-8 mg gelatin/ml drained resin

Identification

Pass Test

Ignition Residue

0.01% max.

Manganese Mn

10 ppb max.

Name Note

microcrystalline

Nitrate

0.001% max.

Operating Flow Rate, Max

< 4 mL/min

1.0 mL/min

2.6 mL/min

0.15 mL/min, water at room temperature;
0.075 mL/min, 20% ethanol or 10% glycerol at room temperature;
0.075 mL/min water at low temperature;
0.035 mL/min 20% ethanol or 10% glycerol at low temperature

0.75 mL/min, water at room temperature;
0.35 mL/min, 20% ethanol at room temperature;
0.35 mL/min water at low temperature;
0.15 mL/min 20% ethanol at low temperature

0.15 mL/min, water at room temperature;
0.07 mL/min, 20% ethanol at room temperature;
0.07 mL/min water at low temperature;
0.03 mL/min 20% ethanol at low temperature

Operating Flow Rate, Recommended

0.5 mL/min

1.3 mL/min

0.30 mL/min

0.04 mL/min

0.075 mL/min

Operating pH

0 - 14

0 - 7

4 - 14

Optical Activity

~7 (5% in H 2 O, suspension)

7.0 (5% in slurry)

6.5 (5% in slurry)

Order code

SH30031.01

SH30237.01

SH30588.02

SH30031.FS

SH30031.02

SH30268.01

SH30588.01

Order Information

HiLoad columns are prepacked XK columns. This product is based on customer order. Delivery time can be longer than for standard products.

Percoll is for research use only.

Tricorn have Valco fittings for AKTAdesign systems and are supplied with M6 connectors for FPLC System. Tricorn columns are design patented, RESOURCE columns are supplied with connectors for high- and low-pressure chromatography equipment and instructions

Tricorn high-performance columns have Valco fittings for AKTAdesign systems and are supplied with M6 connectors for FPLC System. Column not suitable for use with AKTAprime plus system.

Use 20-40 mM imidazole in sample and binding buffers for highest purity.

For research use only.

This product is part of our Custom Designed media program and not yet a standard product. If you are interested in large-scale quantities, please contact your local GE Healthcare representative. This product is produced based on a customer order. Delivery

Percoll PLUS is for research use only.

Tricorn have Valco fittings for AKTAdesign systems and are supplied with M6 connectors for FPLC System. Tricorn columns are design patented. RESOURCE columns are supplied with connectors for high- and low-pressure chromatography equipment and instruction

Osmolality

288-310 mOsm/kg

276-298 mOsm/kg

< 30 mOsm/kg

Osmolality

322-344 mOsm/kg

< 25 mOsm/kg

Merck Index Reference

14,1965

P-CODES

P260

P314

P305 + P351 + P338

P210 - P302 + P352 - P305 + P351 + P338

P261 - P305 + P351 + P338

P280-P305 + P351 + P338-P310

P210-P260-P280-P301 + P310-P305 + P351 + P338-P311

P210-P280-P303 + P361 + P353-P304 + P340 + P310-P305 + P351 + P338 + P310-P370 + P378

Pack size

100 g

2 x 1 ml 10% slurry

5 mL

50 mL

500 mL

1 L

1.5 g

1000 mL

5 Ã— 1 mL

6 x 1 L

1 Ã— 1 mL

1 piece

1.7 mL

100 mL

125 mL

20 mL

25 g

300 mL

5 Ã— 5 mL

6 x 100 mL

75 mL

1 Ã— 4.7 mL

1 Ã— 5 mL

1 mL

10 mL

150 mL

2 x 1 mL

200 mL

25 mL

250 mL

50 columns

500 g

6 mL

6 x 500 mL

Packaging

Plastic Drum

Poly Bottle

Amber glass

Glass Bottle

Packaging Layout

5 mL in glass bottle

500 g in poly drum

1 kg in poly bottle

10, 50, 100, 500 g in poly bottle

2.5, 5, 25 kg in fiber drum

2.5 kg in poly drum

5, 25, 100 mL in glass bottle

1 ft3 in fiber drum

100, 500 g in poly bottle

10kg packaged in open-head fiber drums; 50g, 250g, 500 g, 1kg packaged in poly bottles

25 kg in fiber drum

25, 500 g in poly bottle

5, 25 kg in fiber drum

500 g in poly bottle

Partical Size Dry

18 Âµm-111 Âµm

>20 Âµm

20 Âµm-50 Âµm

40 Âµm-120 Âµm

50 Âµm-150 Âµm

>100 Âµm

Particle Size

40 to 63 µm

60 Âµm

24 Âµm-44 Âµm

25 Âµm-75 Âµm

30 Âµm-40 Âµm

35 to 70 µm

60/325 Mesh

80% between 60 and 100 Mesh

24-44 Âµm

45 Âµm-165 Âµm

45 Âµm-165 Î¼m

45 Î¼m-165 Î¼m

60 to 80 mesh

Particle size distribution, dry

50 â€“ 150 Âµm

20 â€“ 80 Âµm

Particle Size in Methanol Max

163

Particle size, d_50V

~90 Âµm

~90 Î¼m

34 Âµm

~ 8.6 Âµm

~34 Âµm

~34 Î¼m

~50 Âµm

ImpRes = ~ 40 Î¼m, otherwise = ~ 75 Âµm

~75 Âµm

~85 Âµm

pH stability, CIP

2â€“10

2â€“13

2â€“13.7

3â€“12

3â€“14

2â€“9

4â€“9

3â€“13

1â€“14

2â€“14

3â€“10

4â€“13

pH stability, operational

2â€“10

2â€“13

4â€“12

pH 6 to 10

2â€“9

3 to 12

3â€“11

3â€“13

4â€“13

4â€“9

2â€“12

3â€“12

3â€“9

3â€“10

Physical Form

Microcrystalline

Liquid

Powder, -230+400 Mesh,S.A. 500-600m

Solid

Colloidal solution of silica coated with polyvinylpyrrolidone (PVP)

Colloidal solution of silica particles coated with silane

Spray-dried powder

Physical State

Liquid

liquidSuspension

Solid

Pore Size

0.7-0.85 cm 3 /g pore volume (approx.)

0.75 cm 3 /g pore volume

110 Å pore size

~0.8 cm 3 /g pore volume

0.5 mL/g pore volume

0.7-0.9 cm 3 /g pore volume

150 Å

30 Å

90 Å mean pore size

~0.55 mL/g pore volume

0.30 mL/g pore volume

0.8 cm 3 /g pore volume

60 Å average pore size (52-73 Å)

60 Å mean pore size

60 Å medium pore diameter

Packaging Control

dry ice

Particle size distribution, wet

100â€“300 Âµm

20â€“80 Âµm

15â€“88 Âµm

55â€“165 Âµm

87â€“510 Âµm

90â€“280 Âµm

7.0

7.5 pH

6.0 to 7.0

8.5

7.0 to 7.4

7.2 - 7.5

7.2 pH

pH ligand fully charged

Above 6

Below 9

Entire pH range

pH Stability Cleaning-in-Place (CIP)

1 to 14

Pictogram

GHS07

GHS08

GHS02,GHS07

GHS02, GHS05

GHS02, GHS06, GHS08

Pressure/Flow Specification

>100 cm/h, pressure drop cm H2O/bed height=2, bed height 30 cm, 2.6 cm i.d.

150 cm/h (at < 3 bar, 25Â°C, 10 cm bed height)

24-49 cm/h, pressure drop cm H2O/bed height = 2, bed height 30 cm, 2.6 cm i.d

500 cm/h, AxiChrom 300, bed height 20 cm, operating pressure < 2 bar

Base matrix: 250-400 cm/h, 100 kPa, XK 50/60 column, bed height 25 cm

min 60 cm/h, pressure drop cm H2O/bed height=15, bed height 10 cm, column 5 cm i.d.

>480 cm/h, pressure drop cm H2O/bed height=2, bed height 30 cm, 2.6 cm i.d.

400-700 cm/h, 100 kPa, XK 50/30 column, bed height 15 cm

>47 cm/h, pressure drop cm H2O/bed height=2, bed height 30 cm, 2.6 cm i.d.

25-45 cm/h, pressure drop cm H2O/bed height=2, beh height 30 cm, 2.6 cm i.d.

300-600 cm/h, 100 kPa, XK 50/30 column, bed height 15 cm

base matrix 150-250 cm/h, 100 kPa, XK 50/60 column, bed height 25 cm

min 150 cm/h, bed height 10 cm, column 5 cm i.d.

>11 cm/h, pressure drop cm H2O/bed height=2, bed height 30 cm, 2.6 cm i.d.

0.3 MPa at 700 cm/h, 1 m diameter column, 20 cm bed height

250-400 cm/h, 100 kPa, XK 50/60 column, bed height 25 cm

300 kPa at 600 cm/h, 1 m diameter column, 20 cm bed height

300 kPa at 700 cm/h, 1 m diameter column, 20 cm bed height

min 90 cm/h, bed height 10 cm, column 5 cm i.d.

Product Line

Tenax

Pierce™

Pierce™, Tween™

Pierce

Pierce, Tween

Product Size

2.5kg

Product Type

Blocking Buffer

Properties

Ficoll-Paque PREMIUM products constitute a range of sterile, ready-to-use density media containing Ficoll PM400, sodium diatrizoate and disodium calcium EDTA in water for injection (WFI). The densities and osmolalities of the different products have been

Ficoll-Paque PLUS is a sterile, ready-to-use density media containing Ficoll PM400, sodium diatrizoate and disodium calcium EDTA. The density has been optimized for the isolation of human lymphocytes from peripheral blood.

Solution

Molecular Weight

223.07

Purity

>=99%

>=97.0% (GC)

>=98.5% (excluding chlorotrimethylsilane, GC); 99% (excluding TMCS)

99.8%

>1600 C

PurityGrade Notes

Mobile phase for HPLC applications

Quality

regenerated

wet

dry

contains 1% TMCS

LiChropur ™

monodispersed

Nickel Ni

10 ppb max.

Quantity

1 L

2.5 kg

1 kg

10 × 1.2 mL

500 mL

250g

5 kg

50g

10 × 1 mL

250 mL

5 × 1 mL

500 g

500g

Output

8 W

Quantity

10 g

100mL

100 g

50 g

Percent Purity

>=97%

>=99%

≥99.9%

pH Range

8.5â€“9.5

8.9â€“9.9

5.5â€“7.5

R-CODES

36/37/38

10-36/37/38

11-34

48/20

10-34

11-23/24/25-39/23/24/25

Pressure/flow characteristics

250-400 cm/h at <0.1 MPa in a XK 50/60 column with 5 cm diameter and 25 cm bed height (at 20â°C using buffers with the same viscosity as water).

Pressure/flow characteristics: 150-250 cm/h at <0.1 MPa in a XK 50/60 column with 5 cm diameter and 25 cm bed height (at 20â°C using buffers with the same viscosity as water).

250-400 cm/h at <0.1 MPa in a XK 50/60 column with 5 cm diameter and 25 cm bed height (at 20oC using buffers with the same viscosity as water)

Pressure/flow characteristics: â‰¥150 cm/h at <0.1 MPa in a XK 50/30 column with 5 cm diameter and 15 cm bed height (at 20Â°C using buffers with a viscosity similar to water).

Recommended Flow Rate

5 ml/min

1 ml/min

ReagentType

Solvent (Pure)

Ligand

Recombinant Protein A (E.coli)

Recommended Storage

Ambient temperatures

Store at -20°C

Refractive Index

1.4770 to 1.4800 (at 25°C)

Magnesium Mg

10 ppb max.

RIDADR

UN 3286 8(6.1)(3) / PGII

UN 2924 8(3) / PGII

NONH for all modes of transport

UN 1993C 3 / PGIII

UN 2920 3(8) / PGII

RTECS Number

FJ5691460

VV7315000

VV7565000

VV7310000

S-Codes

26-36/37/39-45

16-26-36/37/39-45

16-36/37-45

26-36

Sample Volume

400 to 1000 Î¼l

0.5 to 1 ml (Gravity), 0.75 to 1.0 ml (Spin)

<= 5 ml

100 to 300 Î¼l

<= 13 ml

4 to 50 ÂµL

Sanitization Conditions

2% Hibitane/20% Ethanol or with 70% Ethanol

SMILES

C(=O)[O-].[NH4+]

CS(=O)C

O=[Si]=O

C(CNC(CO)(CO)CO)CS(=O)(=O)[O-].[Na+]

CC(=O)[O-].[NH4+]

Sodium Na

50 ppb max.

Pub Chem CID

23667519

679

24261

2723923

517165

Solubility Information

Slightly soluble in sodium hydroxide. Insoluble in water,ethanol,ether and dilute mineral acids.

Solubility aq. soln.: insoluble.

Soluble in hydrofluoric acid. Insoluble in water.

Soluble in water (333.33mg/ml).

Residueafter Evaporation

5ppm max.

Resolution

40 to 63 µm

Mesh Size

230-400 Mesh

Scale

Lab|Process development

Lab

Lab|Process

Lab|Process development|Process

Storage

2 to 8Â°C, Solution of 0.1 M KH2PO4 and 20% Ethanol; 0.1 M Potassium Phosphate containing 20% Ethanol

2-8C

2Â° to 8Â° C

4 to 30Â°C, 0.15% Kathon CG/ICP Biocide

4 to 30Â°C, 20% Ethanol, 0.05 M Sodium Acetate

4 to 30Â°C, dry resins. Used resins 4 to 8 Â°C in 20% Ethanol or 0.01 M NaOH

2 to 8ÂºC, 20% Ethanol, 50 mM Kâ‚‚HPOâ‚„, 1mM MgClâ‚‚ pH 7.2 in 20% Ethanol

4 to 30Â°C

4 to 30Â°C, 0.2 M sodium acetate in 20% Ethanol

4 to 30Â°C, 20% Ethanol

4 to 8Â°C, 20% Ethanol

2 to 8Â°C, 0.05 M Sodium Acetate, pH 4.0 in 20% Ethanol

2 to 8Â°C, 20% Ethanol, 0.1 M Potassium Phosphate buffer, pH 8.0

2Â°C to 8Â°C in 20% ethanol

-20C

15Â° to 30Â° C

2 to 8Â°C, 20% Ethanol

2 to 8Â°C, 20% Ethanol (alternative storage solution 2% benzyl alcohol)

2 C -8 C

2ËšC to 8ËšC, 20% ethanol

4 to 30Â°C, 20% Ethanol + 0.2 M Sodium Acetate

4Â°C to 30Â°C, 20% ethanol

Storage Conditions

4â€“30Â°C

20% ethanol at 4Â°C to 30Â°C

4 - 8Â°C, 20% Ethanol, 10% medium slurry

4ËšC to 30ËšC, 20% ethanol

At room temperature. Precipitation can occur at low temperature.

Purity GradeNotes

Mobile phase for HPLC applications

Shelf Life

24 months

12 months

Signal Word

Danger

Warning

Solubility

It is delivered as a spray-dried powder and is therefore readily soluble in aqueous media when it is added slowly with concomitant stirring. Any lumps formed during this procedure will dissolve fairly quickly. Concentrations up to 50% (w/v) can easily be

Surface Area

120 m 2 /g

289 m 2 /g

380 m 2 /g

480 m 2 /g

500 m 2 /g

500 m 2 /g (approx.)

800 m 2 /g

~500 m 2 /g

=480 m 2 /g (approx.)

175-225 m 2 /g

300 m 2 /g

430-530 m 2 /g

470-530 m 2 /g

~30 m 2 /g

250-350 m 2 /g

530 m 2 /g

550 m 2 /g

Stability

Stable in alkaline and neutral solutions, but are rapidly hydrolyzed in solution at pH 3, especially at elevated temperature

Ficoll-Paque PLUS is provided as sterile solution which is stable for at least 3 yr when stored between 4Â°C and 30Â°C and protected from light. Deterioration of Ficoll-Paque PLUS product is indicated by the appearance of a yellow color or particulate mat

Stable

Ficoll-Paque PREMIUM products are provided as sterile solutions which are stable for at least 3 yr when stored between 4Â°C and 30Â°C and protected from light. Deterioration of Ficoll-Paque PREMIUM products is indicated by the appearance of a yellow color

Percoll is provided as solution which is stable for at least 5 yr when stored between 4Â°C and 30Â°C

Percoll PLUS is provided as solution which is stable for at least 5 yr when stored between 4Â°C and 30Â°C

Recommended maximum operational flow velocity

300 cm/h

Residue After Evaporation

5ppm max.

Residueafter Ignition

0.01% max.

Resin Type

Capto

Sepharose Fast Flow

MabSelect

Sepharose CL-4B

Sepharose High Performance

Stokes Radius

~ 10

Surface Area Metric

˜35 m2/g

Size Metric TubeRack

12 g

Odor

Odorless

p H

7.5 pH

8.5 pH

Packaging

Bottle

Synonyms

Amberlite(R) IR120 hydrogen form

Methanolic HCl

MBTFA (N-methyl-bis(trifluoroacetamide)or BTFA (bis(TFA)); MBTFA

N-Methyl-N-(trimethylsilyl)trifluoroacetamide; N-Trimethylsilyl-N-methyl trifluoroacetamide; MSTFA

Silica, fumed; Silica; Silicic anhydride; Silicon dioxide; Silicon dioxide amorphous

Silylating mixture V; BSTFA + TMCS

Activated magnesium silicate; Magnesium silicate

Silica gel

TMSH

Dowex(R) 1X8-200 Ion Exchange Resin

N-tert-Butyldimethylsilyl-N-methyltrifluoroacetamide with 1% tert-Butyldimethylchlorosilane; N-Methyl-N-tert-butyldimethylsilyltrifluoroacetamide; MTBSTFA + 1% TBDMSCl; Silylating mixture VI

Silica gel 110 NH2

XAD16N

Particle Size in Methanol Min

ParticleSize

80/200 Mesh

Synonym

ch3coonh4

DMSO

acetic acid, ammonium salt

aerosil

azanium formate

Potassium K

20 ppb max.

Target Organs

Respiratory system

Sterilization

0.1 Âµm sterile filtered

Protease

Protease free

Sulfate

0.001% max.

Sulfate

0.005% max.

Purity Grade Notes

Also meets ACS specifications

Theoretical Plates

> 48 000 m^-1

> 42 000 m^-1

> 13000 m-1

5000 m-1

Titratable Acid

0.001mEq/g max.

TSCA

Yes

Typical Pressure Drop Over the Packed Bed

~ 3 MPa

~ 2 MPa

Reactivity and Stability

The reactivity and stability of Ficoll PM400 are determined by its hydroxyl groups and the glycosidic bonds in the sucrose residues. It is stable in alkaline and neutral solutions. At pH values lower than 3, it is rapidly hydrolyzed, especially at elevate

Vapor Density

<1 (vs air)

>1 (vs air)

Viscosity Max

Relative Viscosity

5 Î·r at 20Â°C: 10% (w/v) 20 Î·r at 20Â°C: 20% (w/v) 60 Î·r at 20Â°C : 30% (w/v 180 Î·r at 20Â°C : 40% (w/v) 600 Î·r at 20Â°C : 50% (w/v)

Water

1% max.

0.04% max.

2% max.

Residue after Ignition

0.005% max.

Wetted Part

WGK

nwg

Width English

1.57 in.

Sample Loading Volume

Determined by desired degree of resolution [Adsorption Mode], ~2% total bed volume [Molecular Sizing], ~1% total bed volume [Partition Mode]

Silver Ag

10 ppb max.

Type

Silica

Vapor Pressure

0.55mbar at 20Â°C

17 mmHg ( 20 °C)

8.8 mmHg ( 27 °C)

Well Volume

8.5

Storage Requirements

-30°C to -10°C

Width Metric

4 cm

Swelling factor

~1.7

Zinc Zn

20 ppb max.

System

Sepax C-Pro|Sefia|Sepax 2

Viscosity

1.98 mPa/s at 25Â°C

If you are viewing this page as a nonregistered user, the price(s) displayed is list price. To view your customer-specific pricing, log in or become a registered user here.