Government Scientific Source

$0~$10(4)
$10~$25(26)
$25~$50(282)
$50~$75(119)
$75~$100(120)
$100~$200(388)
$200~$300(349)
$300~$400(201)
$400~$500(154)
$500~$750(449)
$750~$1000(471)
$1000~$5000(1049)
$5000~$10000(21)
$10000~$50000(45)
$50000~$100000(1)
$100000~$3000000(0)

Temperature

45°C

Absorbance

0.02 AU max. at 330nm

Additives

Without: Calcium, magnesium, phenol red

Without: Calcium, magnesium

Additional Information

Vapor Pressure: 0.55mbar at 20°C

Aluminum Al

20 ppb max.

Application

Cell isolation

For screening of selectivity, binding and elution conditions, as well as small scale purifications

For the purification of GST-tagged proteins from bacterial lysates and other glutathione S-tranferases or glutathione-dependent proteins and for preparation of cytoplasmic extract

HiTrap SP HP and HiTrap Q HP are prepacked, ready to use cation and anion exchange columns for method scouting, group separations, sample concentration and sample clean-up of charged biomolecules

Can be operated with a syringe, peristaltic pump or liquid chromatography system such as AKTA design

For method scouting, group separations, sample concentration and sample clean-up of charged biomolecules

For the removal and/or purification of serine proteases e.g. thrombin

Application_4

Cell isolation

Chromatography system|Manual

Assay Percent Range

>=99 %

99.8% min by GC

>=97 %

Autoclavable

Not Autoclavable

Autoclavable

Autoignition Temp

800 °F

Base Style

Flat Bottom

Bed Height

100 mm

30 mm

600 mm

25 mm

Bed Support

Filter

Net

Bed Volume

120

5 mL

1 ml TALON® Superflow /column

212 mL

320

1 mL

Bed Dimensions

16 x 25 mm

26 x 600 mm

0.7 x 2.5 cm

7 x 25 mm

16 x 100 mm

16 x 600 mm

Application_5

Chromatography system|Manual

Applications

gas chromatography (GC): suitable

HPLC: suitable

solid phase extraction (SPE): suitable

Assay

=99%

=98.0% (HPLC)

Assay Percent Notes

99% min

Bead type

Mag Sepharose Magnetic Beads

Bed Height With One Adaptor

129 mm-159 mm

185 mm-209 mm

225 mm-350 mm

35 mm-59 mm

525 mm-650 mm

825 mm-950 mm

Bed Height With Two Adaptors

680 mm-950 mm

0 to 200 mm

Brand

Axygen®

PYREX®

Calcium Ca

50 ppb max.

Capacity

=25 % absorption capacity (water)

0.7 meq/mL by wetted bed volume

1.0 meq/mL by wetted bed volume

1.1 meq/mL by wetted bed volume

1.2 meq/mL by wetted bed volume

1.35 meq/mL by wetted bed volume

3.0 meq/g by dry weight

0.6 meq/mL by wetted bed volume

0.8 meq/mL by wetted bed volume

3.8 meq/mL by wetted bed volume

250 mL

3.5 to 5.0 mL

1.3 meq/mL by wetted bed volume

1.7 meq/mL by wetted bed volume

4.7 meq/g by dry weight

2.4 mL

CarbonLoad

20%

11%

15%

Carton Qty

1000

200

Binding Capacity/Column

Approx. 40 mg histidine-tagged protein/ml medium

Binding Capacity/ml Chromatography Medium

>10 mg/mL

>Approx. 10 mg GST-tagged protein/mL resin

~ 13 mg ovalbumin

BioProcess resin

yes

Boiling Point

130-132 C (lit.)

189°C

2230 C

Astm Number

ASME B40.3

Average sample loading capacity

400 mg

BedWeight

500 mg

CAP COLOR

Blue

Green

Cap Material

HDPE

LDPE

CAS Registry Number 1

631-61-8

67-68-5

7631-86-9

Bore Size (mm)

CAS_NO

112926-00-8

1343-88-0

7631-86-9

9003-70-7

9052-95-3

39389-20-3

69011-20-7

69011-19-4

ChEBI

CHEBI:28262

CHEBI:62947

Chem AlertStorageSymbol

Gray

Certificate of Analysis

Yes

Certifications/Compliance

Manufactured in cGMP (21 CFR 820) compliant and ISO9001 certified facilities

Chem Alert Storage Symbol

Gray

Chemical Name or Material

Ammonium Acetate

Dimethylsulfoxide

Silica Gel

Chemical Stability

Commonly used aqueous buffers

Stable to commonly used aqueous buffers:1.0 M NaOH, 8 M urea, 8 M guanidine hydrochloride, 70% ethanol

Resistant to aqueous solutions and solvents used in liquid chromatography. Not resistant to Acetone, Ketones, Chlorinated Hydrocarbons, Aliphatic Esters and Phenol. Should be avoided: >10% NaOH, >10% HCl, >5% acetic acid, and strong mineral acids.

Stable in aqueous buffers commonly used in protein A chromatography, 8 M urea, 6 M gua-HCl, 2% benzyl alcohol, 10 mM NaOH (pH 11), 0.1 M sodium citrate/HCl (pH 3), 20% ethanol

Resistant to most solutions used in liquid chromatography except Hydrocarbons, Aromatic solvents and Chlorinated Hydrocarbons

The columns are designed to be used in aqueous solutions and most organic solvents commonly used in liquid chromatography of biomolecules, with the following few exceptions: chlorinated hydrocarbons, acetone and other ketones, aliphatic esters, and phenol

Chemical Stability (Column Hardware)

Resistant to most solutions used in liquid chromatography except hydrocarbons, aromatic solvents, and chlorinated hydrocarbons.

Chemical Substance ID

24870506

24852837

329759181

329763461

24857358

329750331

329759187

329763462

Chemical/Physical Resistance

Temp. Limits:. -10 C to 180 C isothermal and programmed

Swelling (dry to solvent saturated, %):hexane 10-15; toluene 10-15; ethylene dichloride 15-20; ethylene acetate 30-40; 95% ethylene alcohol 60-70; water 60-70.

Chromatography technique

Ion Exchange Chromatography

Hydrophobic Interaction Chromatography

Histidine-tagged protein purification

Antibody affinity chromatography

Group specific affinity

GST-tagged protein purification

Closure Color

Black

Silver

Clear

Blue

Closure Material

Plastic

Aluminum

Polyethylene

Glass

Polypropylene

Closure Type

Plug

With Titeseal Open-bottom Plug Style Plastic Closures, Unattached

Crimp Cap

Screw Cap

ClosureMaterial

Polypropylene

Aluminum

ClosureSize

9 mm

ClosureType

Crimp Top

Open-Top Screw

Screw Cap

Crimp Cap

Screw Thread

Screw Top

Snap Cap

Color

Colorless

Gold

Silver

Color

Colorless to Slightly Yellow

Grey

N/A

Gold/Brown

Amber

Brass

Closure Size

8 mm

13-425

8-425

13 mm

20 mm

9 mm

COLOR

Yellow

Natural

Red

Black

Clear

White

Blue

Column Material

Polypropylene (PP)

Polystyrene (PS)

Column Type

capillary chiral

capillary polar

Empty Column, Polyethylene Filter

capillary extremely polar

Reversed Phase

capillary non-polar

Mixed Mode

packed GC

Size-Exclusion, Proprietary Resin

Column volume

8 mL

Column Feature

Fritted disc

Reservoir

Column Format

Analytical Column

Analytical Column, EASY-Spray

Column i.d.

10 mm

16 mm

26 mm

5 mm

50 mm

Composition

Discovery ® DSC-18, 400 mg

bed wt., 100 mg

bed wt., 500 mg

magnesium sulfate, 150 mg

magnesium sulfate, 6 g

Tris Base, Sodium Chloride

Compatibility

Compatible with most QuEChERS shakers.

Concentration

20 X

Column Capacity

< 1 mg/mL

Column Color

Natural

Content AndStorage

Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, between the following temperatures: 20 to 25°C.

Upon receipt store at 4°C.

Copper Cu

10 ppb max.

Density

1.100g/cmÂ³

Connection Type

Cemented

Fixed

Density Max.

1.2 g/ml

CutOfforExclusionLimit

7.0 kDa

Decomposition Information

>190°C

0.12 µm

0.20 µm

Diameter English Outer

0.3 in.

0.355 in.

0.305 in.

Diameter English Outer Needle

0.028 in.

0.0283 in.

Diameter Metric Inner

6.6 mm

12 mm

Diameter Metric Inner Needle

0.41 mm

0.15 mm

Diameter Metric Outer

12 mm

15 mm

7.75 mm

8 mm

9.02 mm

Diameter Metric

75 µm

2.1 mm

Diameter Metric

4.6 mm

Diameter Metric Outer Needle

0.72 mm

Diameter (mm)

EC Number

200-838-9

215-691-6

231-153-3

231-545-4

262-373-8

215-609-9

215-681-1

238-878-4

Empirical Formula

MgO3Si

Endotoxin Activity Max.

0.12 EU/mg

Estimated Shelf Life from Manufacture Date

5 years

Exclusion Limit Peptides

4 x 10Â³

Feature

closure type black phenolic solid top cap

Endcapped

includes polyethylene frits (20 µm pore size)

preconditioned

syringe type Sample Lock

without needle Luer tip

closure type screw top vial

Not Endcapped

point style 2

septum type Thermogreen ® LB-2

luer lock without slots

needle type N (cemented)

Flow Rate

< 4 mL/min

< 4 ml/min|< 4 ml/min

1 ml/min - 4 ml/min|1 mL/min - 4 mL/min

< 20 ml/min|< 20 ml/min

< 31 ml/min

>10 ml/min

< 20 mL/min

< DarcyÂ´s Law

2 ml/min - 10 ml/min

Recommended: 0.5 to 2.0 mL/min

Flash Point

87°C (188.6°F)

Flow Velocity

< 150 cm/h

15 cm/h

< 300 cm/h

< 450 cm/h

< 75 cm/h at 25 Â°C, HR 16/10 column, 5 cm bed height

< 300 cm/h|< 300 cm/h

< 60 cm/hour

<1800 cm/h

15 cm/h|15 cm/h

For Use With Application

Chromatography

Ideal for dispensing both liquids and gases, useful for samples with dissolved or suspended molecules

Ideal for manual and automated HPLC injections, commonly used in syringe pumps and other liquid handling instruments

Food and Beverages

Endcapped

Proprietary

Endcapped

Yes

For Use With Equipment

20 mm Headspace Septa - MicroLiter

Thermo Scientific HyperSep-96 System

Trace and Focus GC Instruments

Form

fine crystals

neat

powder or crystals

fine powder

powder

Form

Liquid

Exclusion Limit Small Organics

5 x 10Â³

Field14

50Â°-65Â°

Filtrate Vessel Material

Polycarbonate (PC)

Finish

Plain top

Format

Microcentrifuge, Spin Column

Liquid

Format

matrix material

Format_6

Prepacked column

Prepacked columns

Kits

Bulk resin

Formula

(C₁₀H₁₂· C₁₀H₁₀· C₈H₈)_x

(C₁₀H₁₂ · C₁₀H₁₀ · C₈H₈ · C₃

[CH₂CH(C₆H₅)]_x[CH₂CH[C₆H₄

MgO₃Si

Service & Support

O2Si

For Use With

ELSD, UV Detector

Formula Weight

100.39

78.13

60.08

77.08

Grade

High-purity Grade (Davisil Grade 643)

High-purity Grade (Davisil Grade 923)

633

High-purity Grade (Davisil Grade 62)

Technical Grade

Grade 1 Chr

Nuclear Grade

Reagent Grade

High-purity Grade (7754)

Grade

high-purity grade (Davisil Grade 646)

HPLC

for column chromatography

High-Purity Grade

analytical standard

certified reference material

for GC derivatization

high-purity grade (Davisil Grade 633)

high-purity grade (Davisil Grade 636)

Standard

Graduations

0.5 mL

0.5, 1, 1.5 mL

H-Codes

H225-H314

H226 - H315 - H319 - H335

H315-H319-H335

H317

H319

H373

H225-H301-H311-H315-H319-H331-H370

H315 - H318 - H335

H351

H371

H372

Health Hazard 2

CAUTION!

GHS H Statement
H335

WARNING!

Graduated

Guidance

For AKTAprime

Graduated

Yes

Hazardous

Health Hazard 1

H373: May cause damage to organs through prolonged or repeated exposure.

H500

Height

250 mm (approx.)

300 mm (approx.)

600 mm (approx.)

400 mm (approx.)

Height English

1.77 in.

1.69 in.

1.25 in.

Height In

37.485

Height Metric

40 mm

45 mm

43 mm

Height Metric

75mm

32 mm

Hold-up Volume of Membrane

<10 Î¼l

Health Hazard 3

GHS P Statement
P261-P271-P304+P340-P312-P405-P403+P233-P501a

Emergency Overview
Combustible liquid. DMSO readily penetrates skin and may carry other dissolved chemicals into the body. Hygroscopic. Use personal protective equipment. Keep away from open flames, hot surfaces and sources of ignition. Ensure

Emergency Overview
May cause skin, eye, and respiratory tract irritation. Use personal protective equipment. Ensure adequate ventilation. Wash off immediately with plenty of water for at least 15 minutes. Get medical attention immediately if s

Identification

Pass Test

Heavy MetalsasPb

5ppm max.

Ignition Residue

0.01% max.

Height English

1.57 in.

Height (mm)

Immersion Depth Mm

InChIKey

IAZDPXIOMUYVGZ-UHFFFAOYSA-N

USFZMSVCRYTOJT-UHFFFAOYSA-N

Includes

Connectors for high- and low-pressure chromatography equipment and instructions.

Instructions supplied with the concentractors

Dismantling tool, support screen, net ring (10 Î¼m), O-ring, stop plugs, and instructions.

Includes

Two (0.5 m and 2 m L) 1/16 in. OD PTFE tubing assembly with 1/4-28 UNF PP fitting at one end, a frit kit (contains two each of 10 µm PE, 10 µm PTFE, and 30 µm PTFE frits), and a Click-N-Seal 10-32 PEEK conical port fitting.

Vials and Closures

Ionic Capacity

0.18-0.25 mmol H⁺/ml medium

0.09-0.13 mmol H⁺/ml medium

0.11â€“0.16 mmol (Cl^-)/mL resin

0.18-0.24 mmol Cl^-/ml medium

IUPAC Name

azanium;acetate

methylsulfinylmethane

Inlet id

0.75 mm (0.029 in)

1 mm (0.04 in)

1.0 mm (0.04 in)

1.55 mm (0.06 in)

Intrinsic Viscosity

~ 17

IOD-Codes

Ion Exchanger Type

Strong anion exchanger

Weak cation exchanger

Strong cation exchanger

Weak anion exchanger

Length (mm)

38.3

Length English Needle

2 in.

Length Metric

150 mm

100 mm

51 mm

Length Metric

250 mm

60 m

50 mm

Ligand

Carboxymethyl

Sulphopropyl

Cibacron Blue

Glutathione and 10-carbon linker arm

Phenyl

Quaternary amine

Alkali-stabilized Protein A-derived (E. coli)

Diethylaminoethyl

Glutathione

Recombinant protein G lacking albumin-binding region, produced in E. coli

Recombinant GammaBind G type 3 lacking albumin-binding region

TALONÂ® Superflow Cobalt-IMAC

Ligand

Recombinant Protein A (E.coli)

Ligand Coupling Method

Maleimide activation

Cyanogen bromide activation

Epoxy activation

Ether linkages

Ligand_7

Protein L

Protein A

Protein A, alkali stabilized

Protein G

Liner Material

PTFE/Silicone

PTFE/Rubber

Magnesium Mg

10 ppb max.

Marking Spot

Material

clear glass vial

glass TD tube

Polycarbonate (PC)

PTFE/silicone septum

SilTite

Tedlar ® PVDF film

Borosilicate glass

Borosilicate Glass (Type 1)

Polypropylene

Polypropylene (PP)

Alumina

bevel tip stainless steel needle (point style 2)

blue polypropylene cap

Cellulose

Glass Body

N/A

PE frit (20 µm porosity)

PTFE Luer lock

Silica gel

Stainless steel

VG2, 60% Vespel/40% Graphite

Plastic/Stainless Steel

polypropylene hardware

PTFE

Iron Fe

10 ppb max.

Material

Mixed

Borosilicate Glass, PTFE, Polyethylene, FKM/FPM

PTFE Frit

Stainless Steel Column

Fused Silica

Silicone

Brass

Polypropylene Tube

Matrix

Composite of cross-linked agarose and dextran

cross-linked, 6% agarose particles

Highly cross-linked agarose

cross-linked agarose, 4%, spherical

Cross-linked agarose, 6%

Highly cross-linked agarose, 6%

Highly crossed-linked agarose, 6%

cross-linked agarose, 6%, spherical

Cross-linked dextran

Composite of cross-linked agarose

Highly cross-linked agarose with dextran surface extender

Highly cross-linked agarose, spherical

Hydroxypropylated, cross-linked dextran

Matrix

Highly cross-linked 4% agarose

6% Cross-Linked Agarose

Max Pressure

11600 psi (800 bar)

1000 psi

14500 psi (1000 bar)

200 psi

4500 psi (310 bar)

17400 psi (1200 bar)

2000 psi

900 psi

Max Temperature English

122°F

Length English

2 in.

Licensing

For licensing information, see the Licensing Statements page in the About Us section.

MDL Number

MFCD00132722

MFCD00011232

MFCD00078249

MFCD00145841

MFCD00146442

MFCD00132707

MFCD00132718

MFCD00132726

MarkingSpot

Yes

Material Barrel

Borosilicate Glass

Material Plunger

Stainless Steel

Max Temperature Metric

50°C

115°C

Maximum pressure over packed bed

4.0 MPa (40 bar, 580 psi)

Ligand Concentration

~45 Âµmol phenyl/mL resin

Ligand Density

6 mg rProtein A/ml medium

2 mg Protein G/ml medium

3 mg GammaBind G, type 3/ml medium

Linear Formula

(C10H12 · C10H10 · C8H8)x

(CH₃)₂SO

CH3COONH4

MgO3Si

Melting Point

114°C

18.4°C

L CMSGradientSuitability

Pass Test

Lead Pb

10 ppb max.

Manganese Mn

10 ppb max.

MATERIAL

Glass

LDPE

Material Tip

PTFE

Max Temperature

40°C

Material Septa

PTFE/Silicone

Silicone/PTFE

Max Temperature English

239°F

Min Temperature Metric

10°C

MinTemperature English

50°F

Molecular Weight

60.08

0.0

100.39

77.083

78.129

Metal Ion Capacity

approx. 15 Âµmol Ni²⁺/ml medium

~15 Âµmol Ni²⁺/ml medium

Molecular Formula

C2H7NO2

C2H6OS

O2Si

Min Temperature English

50°F

Needle Gauge

22s G

22 G

Needle Point Style

Blunt

Tapered

Sharp, Bevel, Curved, Non-coring

No per Pack

100

Operating Flow Rate, Recommended

0.075 mL/min

0.5 mL/min

1.3 mL/min

Operating pH

2 - 8

3.8 - 6.8

0 - 14

1 - 9

2 - 7.5

2 - 9

3.5 - 7.0

Outlet id

1.55 mm (0.06 in)

0.75 mm (0.029 in)

1.0 mm (0.04 in)

p H

2 to 8

7.5 pH

2.5 to 7

Pack Size

Pack size

1 Ã— 4.7 mL

1 Ã— 5 mL

1 mL

10 mL

150 mL

2 x 1 mL

200 mL

25 mL

250 mL

50 Ã— 100 ÂµL

50 columns

500 g

6 mL

6 x 500 mL

7 Ã— 1 mL

100 g

5 mL

50 mL

500 mL

1 Ã— 1 mL

1 piece

100 mL

20 mL

300 mL

5 Ã— 5 mL

6 x 100 mL

75 mL

1 L

1000 mL

5 Ã— 1 mL

Packaging

1000/Bag

Amber glass

Glass Bottle

Plastic Drum

Poly Bottle

Packaging Layout

1 ft3 in fiber drum

1, 6x1, 2.5 kg in poly bottle

100, 500 g in poly bottle

25, 500 g in poly bottle

1 kg in poly bottle

2.5, 5, 25 kg in fiber drum

Packing Material

Spherical, Nanopolymer Hybrid Silica

Spherical, Solid Core, Ultrapure Silica

Spherical, Fully Porous, Ultrapure Silica

Particle Shape

Spherical

Spherical Solid Core

Particle Size in Methanol Min

Particle size, d_50V

~75 Âµm

~85 Âµm

~90 Âµm

~90 Î¼m

~ 9 Âµm

~ 8.6 Âµm

~34 Âµm

~34 Î¼m

ParticleSize

2.6 µm

5 µm

3 µm

Percent Purity

≥99.9%

>=99%

7.0 to 7.4

7.0

pH ligand fully charged

Entire pH range

Above 6

Below 9

pH Range

5.5â€“7.5

8.5â€“9.5

8.9â€“9.9

pH stability, CIP

1â€“14

2â€“14

3â€“10

2â€“10

2â€“13

2â€“13.7

3â€“12

3â€“14

2â€“14Co²⁺-stripped medium

2â€“9

pH stability, operational

3â€“10

2â€“10

2â€“13

4â€“12

2â€“12

3â€“12

3â€“9

2â€“9

3 to 12

3â€“13

4â€“13

4â€“9

Physical Form

Colloidal solution of silica coated with polyvinylpyrrolidone (PVP)

Colloidal solution of silica particles coated with silane

Spray-dried powder

Solid

Liquid

Physical State

liquidSuspension

Solid

Liquid

>1600 C

Pore Size

0.8 cm 3 /g pore volume

120 Å

20 µm

60 +?

60 Å average pore size (52-73 Å)

60 Å mean pore size

70 Å pore size

90 Å

0.7-0.85 cm 3 /g pore volume (approx.)

110 Å pore diameter

160 Å

60 Å pore size

0.7-0.9 cm 3 /g pore volume

100 Å

150 Å

200 Å

30 Å

300 Å

90 Å mean pore size

90 Å pore size

0.75 cm 3 /g pore volume

100 Å

180 Å

Porosity

10 or 80 Âµm

20 Î¼m

7 Î¼m

10 Î¼m

Potassium K

20 ppb max.

Pressure/Flow Specification

300 kPa at 600 cm/h, 1 m diameter column, 20 cm bed height

25-45 cm/h, pressure drop cm H2O/bed height=2, beh height 30 cm, 2.6 cm i.d.

300-600 cm/h, 100 kPa, XK 50/30 column, bed height 15 cm

base matrix 150-250 cm/h, 100 kPa, XK 50/60 column, bed height 25 cm

150 cm/h (at < 3 bar, 25Â°C, 10 cm bed height)

Base matrix: 250-400 cm/h, 100 kPa, XK 50/60 column, bed height 25 cm

400-700 cm/h, 100 kPa, XK 50/30 column, bed height 15 cm

Product Line

HyperSep

Easy Spray

Pierce

Zeba

Needle PointNumber

Nitrate

0.001% max.

Operating Flow Rate, Max

1.0 mL/min

2.6 mL/min

0.15 mL/min, water at room temperature;
0.075 mL/min, 20% ethanol or 10% glycerol at room temperature;
0.075 mL/min water at low temperature;
0.035 mL/min 20% ethanol or 10% glycerol at low temperature

Optical Activity

~7 (5% in H 2 O, suspension)

7.0 (5% in slurry)

6.5 (5% in slurry)

Nickel Ni

10 ppb max.

Order Information

Percoll is for research use only.

Tricorn have Valco fittings for AKTAdesign systems and are supplied with M6 connectors for FPLC System. Tricorn columns are design patented, RESOURCE columns are supplied with connectors for high- and low-pressure chromatography equipment and instructions

Use 20-40 mM imidazole in sample and binding buffers for highest purity.

Percoll PLUS is for research use only.

This product is produced based on a customer order. Delivery time may be longer than for standard products.

Tricorn have Valco fittings for AKTAdesign systems and are supplied with M6 connectors for FPLC System. Tricorn columns are design patented. RESOURCE columns are supplied with connectors for high- and low-pressure chromatography equipment and instruction

Noper Pack

100

Osmolality

< 30 mOsm/kg

P-CODES

P280

P314

P305 + P351 + P338

ProductLine

Accucore

Acclaim

Assembled Kit

Properties

Solution

Ficoll-Paque PREMIUM products constitute a range of sterile, ready-to-use density media containing Ficoll PM400, sodium diatrizoate and disodium calcium EDTA in water for injection (WFI). The densities and osmolalities of the different products have been

Partical Size Dry

18 Âµm-111 Âµm

40 Âµm-120 Âµm

50 Âµm-150 Âµm

Protease

Protease free

Particle Size in Methanol Max

163

Package Type

200/Bag

Particle Size

2 µm

24-44 Âµm

45 Âµm-165 Âµm

45 Î¼m-165 Î¼m

24 Âµm-44 Âµm

40 to 60 µm

60 Âµm-165 Âµm

60 Î¼m-160 Î¼m

Phase

Reversed Phase

Reversed Phase and Ion Exchange

Pub Chem CID

517165

679

Pictogram

GHS02,GHS07

GHS07

GHS08

PoreSize

80 Å

300 Å

Preslit

Pressure Limit

20 bar (2 MPa, 290 psi)

Pressure/flow characteristics

250-400 cm/h at <0.1 MPa in a XK 50/60 column with 5 cm diameter and 25 cm bed height (at 20â°C using buffers with the same viscosity as water).

Pressure/flow characteristics: 150-250 cm/h at <0.1 MPa in a XK 50/60 column with 5 cm diameter and 25 cm bed height (at 20â°C using buffers with the same viscosity as water).

150-250 cm/h at <0.1MPa in a XK 50/60 column with 5 cm diameter and 25 cm bed height (at 20Â°C using buffers with the same viscosity as water)

No per Pack

100

Osmolality

< 25 mOsm/kg

PurificationTarget

Buffer Exchange, Protein

Qty/Pk

1 / Pk

Quality

monodispersed

with moisture indicator free of heavy metals

LiChropur ™

dry

pH Stability Cleaning-in-Place (CIP)

1 to 14

Product Family

PYREX® Apparatus, Extraction, Chromatographic, Coarse Fritted Disc

PYREX® Chromatography Column with Reservoir, PTFE Product Standard Stopcock

Quantity

100 g

6 pack

10 g

1000/Pk.

1000

200

200 pack

Quantity

100

500 g

500g

1000 Pack

108

5 kg

100 Pack

100/Pk.

1000/Cs.

500

50g

Each

144 Pack

500 mL

Preslit

Yes

Reactivity and Stability

The reactivity and stability of Ficoll PM400 are determined by its hydroxyl groups and the glycosidic bonds in the sucrose residues. It is stable in alkaline and neutral solutions. At pH values lower than 3, it is rapidly hydrolyzed, especially at elevate

Relative Viscosity

5 Î·r at 20Â°C: 10% (w/v) 20 Î·r at 20Â°C: 20% (w/v) 60 Î·r at 20Â°C : 30% (w/v 180 Î·r at 20Â°C : 40% (w/v) 600 Î·r at 20Â°C : 50% (w/v)

Resin Type

MabSelect

Sepharose High Performance

Capto

Sepharose Fast Flow

S-Codes

26-36

Sample Loading Volume

Determined by desired degree of resolution [Adsorption Mode], ~2% total bed volume [Molecular Sizing], ~1% total bed volume [Partition Mode]

Sample Volume

<= 1.5 ml

<= 13 ml

4 to 50 ÂµL

600 Âµl

<= 15 ml

<= 5 ml

< 0.5 mL

Septum

None

Red PTFE/White Silicone

PTFE/Silicone

Signal Word

Warning

Danger

Silver Ag

10 ppb max.

SMILES

CC(=O)[O-].[NH4+]

CS(=O)C

Purity GradeNotes

Mobile phase for HPLC applications

Qty/CS

1 / Cs

PurityGrade Notes

Mobile phase for HPLC applications

Purity

>=99%

Stability

Ficoll-Paque PREMIUM products are provided as sterile solutions which are stable for at least 3 yr when stored between 4Â°C and 30Â°C and protected from light. Deterioration of Ficoll-Paque PREMIUM products is indicated by the appearance of a yellow color

Percoll is provided as solution which is stable for at least 5 yr when stored between 4Â°C and 30Â°C

Percoll PLUS is provided as solution which is stable for at least 5 yr when stored between 4Â°C and 30Â°C

Stable in alkaline and neutral solutions, but are rapidly hydrolyzed in solution at pH 3, especially at elevated temperature

Stationary Phase

C18

Proprietary

Reversed Phase/Anion Exchange/Cation Exchange

Storage

-20C

15Â° to 30Â° C

2 to 8Â°C, 20% Ethanol

2 to 8Â°C, 20% Ethanol (alternative storage solution 2% benzyl alcohol)

2 C -8 C

4 to 30Â°C, 20% Ethanol + 0.2 M Sodium Acetate

4Â°C to 30Â°C, 20% Ethanol

2 to 8Â°C, 0.05 M Sodium Acetate, pH 4.0 in 20% Ethanol

2-8C

4 to 30Â°C, 0.15% Kathon CG/ICP Biocide

4 to 30Â°C, dry resins. Used resins 4 to 8 Â°C in 20% Ethanol or 0.01 M NaOH

4Â°C to 8Â°C

4 to 30Â°C

4 to 30Â°C, 0.2 M Sodium Acetate in 20% Ethanol

4 to 30Â°C, 20% Ethanol

4 to 8Â°C, 20% Ethanol

Style

Fine Filter (15-45 microns)

Medium Filter (45-90 microns)

Coarse Filter (90-135 microns)

R-CODES

36/37/38

10-36/37/38

48/20

Surface Area

250-350 m 2 /g

530 m 2 /g

300 m²/g

=480 m 2 /g (approx.)

200 m 2 /g

300 m 2 /g

320 m 2 /g

430-530 m 2 /g

470-530 m 2 /g

475 m 2 /g

80 m 2 /g

130 m²/g

450 m 2 /g

450 m²/g

100 m 2 /g

289 m 2 /g

450 m 2 /g

480 m 2 /g

500 m 2 /g

500 m 2 /g (approx.)

~500 m 2 /g

170 m 2 /g

100 m²/g

Swelling factor

~1.7

Recommended Flow Rate

1 ml/min

Recommended maximum operational flow velocity

300 cm/h

Residue After Evaporation

5ppm max.

RIDADR

NONH for all modes of transport

UN 1993C 3 / PGIII

UN 3286 8(6.1)(3) / PGII

Recommended Storage

Ambient temperatures

Refractive Index

1.4770 to 1.4800 (at 25°C)

Scale

Lab

Lab|Process

Lab|Process development|Process

Lab|Process development

RTECS Number

VV7315000

Residueafter Evaporation

5ppm max.

Synonyms

QuEChERS; QuEChERS

Tedlar(R) Gas Sampling Bag

Activated magnesium silicate; Magnesium silicate

QuEChERS

Silica gel

System

Sepax C-Pro|Sefia|Sepax 2

Sodium Na

50 ppb max.

Solubility Information

Solubility aq. soln.: insoluble.

Shelf Life

24 months

Sterilization

0.1 Âµm sterile filtered

Storage Conditions

4ËšC to 30ËšC, 20% ethanol

4â€“30Â°C

4 - 30Â°C

Solubility

It is delivered as a spray-dried powder and is therefore readily soluble in aqueous media when it is added slowly with concomitant stirring. Any lumps formed during this procedure will dissolve fairly quickly. Concentrations up to 50% (w/v) can easily be

Theoretical Plates

5000 m-1

> 48 000 m^-1

> 38 000 m^-1

Stokes Radius

~ 10

Stopcock Style

Straight bore PTFE

Type

Analytical Column

Liquid Chromatography (LC)

Low Coring Silicone

Gastight Syringe

HPLC Column

Autosampler Syringe

Microliter Syringe

Solid Phase Extraction Cartridge

Suitability

Autosampler compatibility:Agilent Agilent 1050/1090A Agilent 1100/1200 Agilent 7673A, 7683 Agilent 5890/7985A/6890Hitachi AS-1000, AS-2000, AS-4000 L7200/L7250LEAP Technologies CTC LC PAL, GC PAL CombiPAL HTC PAL/HTS PALPerkinElmer Autosystem/AS-2000/XL

USP Type

Vapor Density

>1 (vs air)

<1 (vs air)

Viscosity

1.98 mPa/s at 25Â°C

Volume

12 mL

10 mL

2 mL

25 mL

0.5 ml

2-6 ml

22 mL

250 µL

3 mL

50 mL

6 mL

1 mL

Volume Metric

10 µL

2 mL

4 mL

250 µL

Volume Metric

100 µL

2.0 mL

6 mL

1 mL

Water

0.04% max.

Termination

Cemented Needle (N)

Luer-tip

Synonym

DMSO

Target Organs

Respiratory system

Temperature

60°C

Typical Pressure Drop Over the Packed Bed

~ 2 MPa

~ 3 MPa

U SPType

Vapor Pressure

0.55mbar at 20Â°C

17 mmHg ( 20 °C)

Volume English

1 dr.

Wetted Part

yes

WGK

nwg

Thread Size

11 mm

8-425

10-425

20 mm

9 mm

Titratable Acid

0.001mEq/g max.

TSCA

Yes

Thickness Metric

1.3 mm

Total binding capacity

~50 mg hIgG/mL resin

Viscosity Max

Volume_28

2-6 ml

Zinc Zn

20 ppb max.

If you are viewing this page as a nonregistered user, the price(s) displayed is list price. To view your customer-specific pricing, log in or become a registered user here.