Government Scientific Source

$0~$10(60)
$10~$25(179)
$25~$50(686)
$50~$75(581)
$75~$100(467)
$100~$200(1136)
$200~$300(805)
$300~$400(462)
$400~$500(389)
$500~$750(785)
$750~$1000(720)
$1000~$5000(1409)
$5000~$10000(146)
$10000~$50000(155)
$50000~$100000(25)
$100000~$3000000(11)

Absorbance

0.02 AU max. at 330nm

Temperature

45°C

Additives

Without: Calcium, magnesium, phenol red

Without: Calcium, magnesium

Additional Information

Vapor Pressure: 0.55mbar at 20°C

Applications

gas chromatography (GC): suitable

HPLC: suitable

HPTLC: suitable

thin layer chromatography (TLC): suitable

solid phase extraction (SPE): suitable

LPLC: suitable

Application

For the purification of GST-tagged proteins from bacterial lysates and other glutathione S-tranferases or glutathione-dependent proteins and for preparation of cytoplasmic extract

HiTrap SP HP and HiTrap Q HP are prepacked, ready to use cation and anion exchange columns for method scouting, group separations, sample concentration and sample clean-up of charged biomolecules

Glutathione S-transferase (GST) tagged proteins produced using the pGEX series of expression vectors, Other glutathione S-transferases and glutathione-dependent proteins

For method scouting, group separations, sample concentration and sample clean-up of charged biomolecules

For the removal and/or purification of serine proteases e.g. thrombin

Cell isolation

For screening of selectivity, binding and elution conditions, as well as small scale purifications

Purification of recombinant proteins tagged with Strep-tag® II and Twin-Strep-tag®

Can be operated with a syringe, peristaltic pump or liquid chromatography system such as AKTA design

Flexible and intuitive chromatography system for fast purification of proteins, peptides, and nucleic acids from microgram to gram levels of target product.

Autoignition Temp

800 °F

Bed Volume

5 mL

1 mL

320

120

Assay

=99%

Application_5

Chromatography system|Manual

Bed Height

25 mm

600 mm

100 mm

BedWeight

500 mg

Capacity

1.7 meq/mL by wetted bed volume

1.8 meq/mL by wetted bed volume

0.8 meq/mL by wetted bed volume

=25 % absorption capacity (water)

1.3 meq/mL by wetted bed volume

4.7 meq/g by dry weight

1.1 meq/mL by wetted bed volume

1.2 meq/mL by wetted bed volume

0.6 meq/mL by wetted bed volume

CarbonLoad

15%

Autosampler Injection

No (optional)

Average sample loading capacity

400 mg

50 mg

Bed Dimensions

16 x 100 mm

16 x 600 mm

1.6 x 2.5 cm

7 x 25 mm

16 x 25 mm

26 x 600 mm

Bed Height With Two Adaptors

0 to 200 mm

Assay Percent Range

99.8% min by GC

Binding Capacity/Column

Approx. 40 mg histidine-tagged protein/ml medium

BioProcess resin

yes

Boiling Point

189°C

2230 C

CAS Registry Number 1

67-68-5

7631-86-9

Buffer

Running Buffers

Avoid Using

Oxidizing agents, citrate buffers

Application_4

Cell isolation

Chromatography system|Manual

Binding Capacity/ml Chromatography Medium

At least 10 mg histidine-tagged protein

Bore Size (mm)

Capacity

Flow: 2,500 mL/min @ 29 in. Hg

CAS_NO

1344-28-1

142-82-5

69011-20-7

9052-95-3

67-56-1

9003-70-7

39389-20-3

75-09-2

112926-00-8

1343-88-0

104219-63-8

7631-86-9

Bed Support

Net

Filter

Autoclavable

Not Autoclavable

Base Style

Flat Bottom

Certifications/Compliance

Manufactured in cGMP (21 CFR 820) compliant and ISO9001 certified facilities

Chemical Stability

0.01 M HCl and 0.01 M NaOH (one week); 10 mM EDTA, 5 mM DTT, 1 M NaOH, 5 mM TCEP, 20 mM 1²-Mercaptoethanol, and 6 M guanidine-HCl (24 hours); 500 mM imidazole and 100 mM EDTA (2 hours); 30% 2-propanol (20 minutes).

Resistant to most solutions used in liquid chromatography except Hydrocarbons, Aromatic solvents and Chlorinated Hydrocarbons

Stable in aqueous buffers commonly used in protein A chromatography, 8 M urea, 6 M gua-HCl, 2% benzyl alcohol, 10 mM NaOH (pH 11), 0.1 M sodium citrate/HCl (pH 3), 20% ethanol

Commonly used aqueous buffers

The columns are designed to be used in aqueous solutions and most organic solvents commonly used in liquid chromatography of biomolecules, with the following few exceptions: chlorinated hydrocarbons, acetone and other ketones, aliphatic esters, and phenol

Stable to commonly used aqueous buffers:1.0 M NaOH, 8 M urea, 8 M guanidine hydrochloride, 70% ethanol

Resistant to aqueous solutions and solvents used in liquid chromatography. Not resistant to Acetone, Ketones, Chlorinated Hydrocarbons, Aliphatic Esters and Phenol. Should be avoided: >10% NaOH, >10% HCl, >5% acetic acid, and strong mineral acids.

ChEBI

CHEBI:28262

Chemical Stability (Column Hardware)

Resistant to most solutions used in liquid chromatography except hydrocarbons, aromatic solvents and chlorinated hydrocarbons

Resistant to most solutions used in liquid chromatography except hydrocarbons, aromatic solvents, and chlorinated hydrocarbons

Resistant to most solutions used in liquid chromatography except hydrocarbons, aromatic solvents, and chlorinated hydrocarbons.

Resistant to most solutions used in liquid chromatography except hydrocarbons, aromatic solvents and chlorinated hydrocarbons.

Chem AlertStorageSymbol

Gray

Chemical Substance ID

24852837

329755080

329759181

329750331

329759187

24857358

329763462

329763461

24870506

Certificate of Analysis

Yes

Chem Alert Storage Symbol

Gray

Closure Size

9 mm

13 mm

20 mm

11 mm

Closure Type

Screw

With Titeseal Open-bottom Plug Style Plastic Closures, Unattached

Crimp Cap

Screw Cap

Color

orange

Graphite

Multi

Colorless to slightly yellow

Grey

Yellow

Brass

Silver/Gray

Blue/Tan

Gold

red band

White

Gold/Brown

Green

Tan

Colorless

N/A

natural

Amber

Black

Clear

Orange

Red

COLOR

Blue

Column i.d.

5 mm

50 mm

26 mm

10 mm

16 mm

Chemical Name or Material

Silica Gel

Dimethylsulfoxide

Chemical/Physical Resistance

Swelling (dry to solvent saturated, %):hexane 10-15; toluene 10-15; ethylene dichloride 15-20; ethylene acetate 30-40; 95% ethylene alcohol 60-70; water 60-70.

Temp. Limits:. -10 C to 180 C isothermal and programmed

Chromatography technique

Group specific affinity

Ion Exchange Chromatography

Antibody affinity chromatography

GST-tagged protein purification

Hydrophobic Interaction Chromatography

Histidine-tagged protein purification

Affinity coupling

Closure Color

Silver

Black

Closure Material

Plastic

Polypropylene

Polyethylene

Aluminum

Column Type

Mixed Mode

capillary chiral

capillary non-polar

packed GC

Reversed Phase

capillary extremely polar

capillary polar

SPE

Composition

Tris Base, Sodium Chloride

Discovery ® DSC-18, 400 mg

bed wt., 500 mg

magnesium sulfate, 150 mg

ClosureMaterial

Polypropylene

ClosureType

Screw

Snap Cap

Screw Top

Screw Cap

Color

Silver

Natural

Density Max.

1.2 g/ml

Decomposition Information

>190°C

Diameter Metric Inner

15 mm

12 mm

6.6 mm

Column Capacity

< 1 mg/mL

Column Format

Analytical Column, EASY-Spray

Analytical Column

Column volume

1 mL

8 mL

Description

For gas: Inert carrier, He, H2, N2, AR, Air

ClosureSize

11 mm

9 mm

Depth

470 mm

Diameter Metric

75 µm

2.1 mm

4.6 mm

0.20 µm

0.12 µm

Density

1.100g/cmÂ³

Diameter

11 mm

Dimensions_29

300 Ã— 360 Ã— 575 mm (W Ã— H Ã— D)

Diameter Metric Outer

8 mm

12 mm

15 mm

Column Phase

ENVI-Carb

EC Number

215-609-9

266-046-0

200-838-9

231-153-3

215-681-1

238-878-4

200-659-6

215-691-6

231-545-4

262-373-8

205-563-8

Compatibility

Compatible with most QuEChERS shakers.

Concentration

20 X

Diameter Metric Opening

11 mm

Content AndStorage

Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, between the following temperatures: 20 to 25°C.

Flow Rate

< 20 mL/min

< DarcyÂ´s Law

5 mL/min|5 mL/min

Recommended: 0.5 to 2.0 mL/min

2 ml/min - 10 ml/min|2 ml/min - 10 ml/min

2 ml/min - 10 ml/min

< 1.0 ml/min

< 10 ml/min|< 10 ml/min

< 31 ml/min

>10 ml/min

0.001 to 25 mL/min (normal range), 0.01 to 50 mL/min (column packing flow)

1.6 mL/min

< 4 ml/min

< 4 ml/min|< 4 ml/min

1 ml/min - 4 ml/min|1 mL/min - 4 mL/min

< 20 ml/min|< 20 ml/min

1 ml/min - 4 ml/min

4 ml/min (1 ml), 5 ml/min (5ml)|4 ml/min (1 ml), 5 ml/min (5ml)

Flow Velocity

< 300 cm/h|< 300 cm/h

< 60 cm/hour

10 cm/h - 50 cm/h

<1800 cm/h

15 cm/h|15 cm/h

< 150 cm/h

< 75 cm/h at 25 Â°C, HR 16/10 column, 5 cm bed height

15 cm/h

150 cm/h - 600 cm/h|150 cm/h~600 cm/h

< 450 cm/h

< 300 cm/h

â‰¤ 600 cm/h

For Use With

ELSD, UV Detector

Exclusion Limit Small Organics

5 x 10Â³

Feature

Fluorescent Indicator

septum type Thermogreen ® LB-2

needle type N (cemented)

closure type screw top vial

closure type black phenolic solid top cap

without needle Luer tip

Not Endcapped

Endcapped

syringe type Sample Lock

No Flourescent Indicator

preconditioned

Field14

50Â°-65Â°

For Use With Application

TLC

GC/LC

Food and Beverages

Filtrate Vessel Material

Polycarbonate (PC)

Finish

Plain top

Endcapped

Proprietary

Yes

Flow Cell Path Length

2 mm (optional 0.5 mm and 10 mm)

2 mm (optional 5 mm)

Exclusion Limit Peptides

4 x 10Â³

For Use With

For Use With AKTA start

Biacore 4000, Biacore T200, Biacore T100, Biacore 8K, Biacore S200 and Biacore X100

Format_6

Bulk resin

Prepacked column

Kits

Prepacked columns

Formula

CH₃OH

[CH₂CH(C₆H₅)]_x[CH₂CH[C₆H₄

CH₃(CH₂)₅CH₃

O2Si

Service & Support

MgO₃Si

(C₁₀H₁₂· C₁₀H₁₀· C₈H₈)_x

Estimated Shelf Life from Manufacture Date

5 years

FilmThickness

1 µm

Form

liquid

powder or crystals

powder

fine powder

fine crystals

For Use With Equipment

Click-On Inline Filter

Inert Carrier, He, H2, N2, AR

Inert Carrier, He, H2, N2, AR, Air

For use with1

AKTA avant and AKTA pure systems

Endotoxin Activity Max.

0.12 EU/mg

Format

Liquid

matrix material

Formula Weight

78.13

100.39

60.08

Flow Direction

Supported bidirectionally. Certain applications may require orientation, i.e., vents. Reverse flow only for low pressure applications.

Diameter MetricOpening

9 mm

Empirical Formula

MgO3Si

Flash Point

87°C (188.6°F)

Grade

high-purity grade

high-purity grade (Davisil Grade 923)

HPLC

Standard

HPLC Gradient

high-purity grade (Davisil Grade 646)

puriss. p.a.

certified reference material

technical grade

H-Codes

H351

H372

H317

H319

H373

H371

H315-H319-H335

Height

629 mm

135 mm

210 mm

660 mm

Height Metric

32 mm

45 mm

Hold-up Volume of Membrane

<20 Î¼l

<10 Î¼l

<5 Î¼l

Guidance

The kit contains 1 x Fill port 6 x Needle 1 x Syringe holder *The wetted parts are resistant to organic solvents and salt buffers commonly used in chromatography of biomolecules, except 100 % Ethyl acetate, 100 % Hexane and 100 % Tetrahydrofuran.

FR-902 is pre-set to 0.2 MPa and is used when using low pressure columns and/or when the pH electrode is mounted in the pH flow cell.

The kit contains:
1 x 25 Âµl sample loop i.d. 0.5 mm
1 x 50 Âµl sample loop i.d. 0.5 mm
1 x 100 Âµl sample loop i.d. 0.5 mm
1 x 200 Âµl sample loop i.d. 0.8 mm
1 x 500 Âµl sample loop i.d. 0.8 mm
Each sample loop consists of tubing

For one column

Lamp and aperture are supplied with Hg lamp and housing

The tubing is fitted with 2 x Nut UNF 5/16" male 2 x Ferrule *The wetted parts are resistant to organic solvents and salt buffers commonly used in chromatography of biomolecules, except 100 % Ethyl acetate, 100 % Hexane and 100 % Tetrahydrofuran.

The ends: Plug FCC - RJ45 round.

Includes

100 vials and 100 seals with septa

Includes

2 Ã— 100 ml phosphate 8x stock solution (pH 7.4), and 100 ml highly pure 2 M imidazole (pH 7.4)

Dismantling tool, support screen, net ring (10 Î¼m), O-ring, stop plugs, and instructions.

Connectors for high- and low-pressure chromatography equipment and instructions.

Instructions supplied with the concentractors

Inlet id

1.0 mm (0.04 in)

0.75 mm (0.029 in)

1 mm (0.04 in)

1.55 mm (0.06 in)

Intrinsic Viscosity

~ 17

IOD-Codes

Ion Exchanger Type

Strong anion exchanger

Weak anion

Weak anion exchanger

Strong cation exchanger

Weak cation exchanger

IonExchangeGroup

Quaternary Ammonium

Hazard s

Flammable, Irritant

Health Hazard 3

Emergency Overview
Combustible liquid. DMSO readily penetrates skin and may carry other dissolved chemicals into the body. Hygroscopic. Use personal protective equipment. Keep away from open flames, hot surfaces and sources of ignition. Ensure

Height English

1.25 in.

1.77 in.

Height English

18 in.

Housing

Polypropylene (PP)

Kit Contents

Ovalbumin (50 mg): 43 000 M_r
Conalbumin (50 mg): 75 000 M_r
Aldolase (50 mg): 158 000 M_r
Ferritin (15 mg): 440 000 M_r
Thyroglobulin (50 mg): 669 000 M_r
Blue Dextran 2000 (50 mg

Length English

2 in.

Length In

Length Metric

500 mm

150 mm

100 mm

30 m

Licensing

For licensing information, see the Licensing Statements page in the About Us section.

For licensing information, see the Licensing Statements page in the About Us section. https://www.gelifesciences.com/legal/licensing-statements

For licensing information, see the Licensing Statements page in the About Us section.

Ligand

Cibacron Blue

Human IgG

Quaternary amine

Strep-Tactin XT

Sulphopropyl

Carboxymethyl

Diethylaminoethyl

Recombinant protein A (E.coli)

TALONÂ® Superflow Cobalt-IMAC

Alkali-stabilized Protein A-derived (E. coli)

Glutathione and 10-carbon linker arm

Phenyl

Glutathione

Recombinant protein G lacking albumin-binding region, produced in E. coli

Ligand Coupling Method

Epoxy activation

Maleimide activation

Ether linkages

Cyanogen bromide activation

Ligand_7

Butyl, octyl, phenyl

Protein L

Protein A

Protein A, alkali stabilized

Protein G

MarkingSpot

Yes

Material

Ethylenetetra fluoroethylene (ETFE)

Etylenetetra fluoroethylene(ETFE) Polypropylene (PP)

Metal

stainless steel column

Steel

Steel/Plastic

Vespel/Graphite

Plastic/Stainless Steel

Polyetheretherketone (PEEK)

PTFE

clear glass vial

Glutathione Sepharose 4 B

Mixed

PTFE/silicone septum

Tedlar ® PVDF film

glass

glass body

PE frit (20 µm porosity)

Aluminum

glass support

glass TD tube

Polycarbonate (PC)

SilTite

Vespel/Graphite, VG1

polypropylene hardware

PEEK

Polyetheretherketone (PEEK) Polytetrafluoroethene (PTFE)

polypropylene tube

VG1, 85% Vespel/15% Graphite

aluminum support

bevel tip stainless steel needle (point style 2)

Fused silica

Silica Gel

silica gel 60 matrix

Stainless Steel

stainless steel hardware

Vespel

VG2, 60% Vespel/40% Graphite

Borosilicate Glass

Polypropylene

Polypropylene (PP)

graphite

PTFE frit

N/A

MDL Number

MFCD00011232

MFCD00004595

MFCD00132707

MFCD00132722

MFCD00146442

MFCD00132726

MFCD00145831

MFCD00009544

MFCD00078249

MFCD00145841

Melting Point

18.4°C

Health Hazard 2

WARNING!

Multi-Step Purification

Yes, (optional)

Operating Flow Rate, Recommended

0.5 mL/min

0.075 mL/min

0.80 mL/min

1.3 mL/min

Optical Activity

7.0 (5% in slurry)

~7 (5% in H 2 O, suspension)

6.5 (5% in slurry)

Order Information

Percoll is for research use only.

Tricorn have Valco fittings for AKTAdesign systems and are supplied with M6 connectors for FPLC System. Tricorn columns are design patented, RESOURCE columns are supplied with connectors for high- and low-pressure chromatography equipment and instructions

Use 20-40 mM imidazole in sample and binding buffers for highest purity.

For research use only.

Percoll PLUS is for research use only.

HiLoad columns are prepacked XK columns.

This product is produced based on a customer order. Delivery time may be longer than for standard products.

Tricorn have Valco fittings for AKTAdesign systems and are supplied with M6 connectors for FPLC System. Tricorn columns are design patented. RESOURCE columns are supplied with connectors for high- and low-pressure chromatography equipment and instruction

Osmolality

288-310 mOsm/kg

< 30 mOsm/kg

Outlet id

1.0 mm (0.04 in)

1.55 mm (0.06 in)

0.75 mm (0.029 in)

P-CODES

P280

P314

P305 + P351 + P338

Pack size

500 mL

1 L

10 mL

200 mL

25 mL

500 g

6 x 500 mL

1 Ã— 5 mL

1 mL

150 mL

250 mL

50 Ã— 100 ÂµL

50 columns

6 mL

7 Ã— 1 mL

50 mL

100 mL

5 Ã— 1 mL

1 Ã— 4.7 mL

2 x 1 mL

1000 mL

100 g

5 mL

1 Ã— 1 mL

5 Ã— 5 mL

6 x 100 mL

75 mL

1 piece

20 mL

300 mL

Particle Size in Methanol Max

163

Particle size, d_50V

~90 Î¼m

~34 Âµm

~34 Î¼m

~85 Âµm

~90 Âµm

34 Âµm

~ 8.6 Âµm

~75 Âµm

~ 9 Âµm

pH stability, CIP

2â€“13

2â€“13.7

3â€“12

1â€“14

2â€“14

3â€“10

4â€“13

2â€“9

2â€“10

3â€“14

2â€“14Co²⁺-stripped medium

Phase

Reversed Phase

Reversed Phase and Ion Exchange

Pore Size

0.7-0.85 cm 3 /g pore volume (approx.)

100 Å

60 +?

60 Å mean pore size

70 Å pore size

0.8 cm 3 /g pore volume

60 Å average pore size (52-73 Å)

0.7-0.9 cm 3 /g pore volume

30 Å

300 Å

90 Å pore size

110 Å pore diameter

60 Å pore size

1000 Å

~0.55 mL/g pore volume

120 Å

60 Å medium pore diameter

90 Å

0.75 cm 3 /g pore volume

180 Å

160 Å

100 Å

150 Å

90 Å mean pore size

60 Å

Porosity

7 Î¼m

20 Î¼m

10 or 80 Âµm

10 Î¼m

Pressure Limit

20 bar (2 MPa, 290 psi)

Quantity

200

100

50 g

100 g

500 mL

1000

144 Pack

10 g

100 Pack

Quantity

30/Pk.

1000/Pk.

1/Pk.

1000/Cs.

Each

100/Pk.

Residueafter Evaporation

5ppm max.

Sample loop

Default 100 ÂµL

Shelf Life

24 months

Signal Word

Danger

Warning

Stability

Stable in alkaline and neutral solutions, but are rapidly hydrolyzed in solution at pH 3, especially at elevated temperature

Percoll PLUS is provided as solution which is stable for at least 5 yr when stored between 4Â°C and 30Â°C

Ficoll-Paque PREMIUM products are provided as sterile solutions which are stable for at least 3 yr when stored between 4Â°C and 30Â°C and protected from light. Deterioration of Ficoll-Paque PREMIUM products is indicated by the appearance of a yellow color

Percoll is provided as solution which is stable for at least 5 yr when stored between 4Â°C and 30Â°C

Ficoll-Paque PLUS is provided as sterile solution which is stable for at least 3 yr when stored between 4Â°C and 30Â°C and protected from light. Deterioration of Ficoll-Paque PLUS product is indicated by the appearance of a yellow color or particulate mat

Stokes Radius

~ 10

Storage

4 to 30Â°C, 0.2 M Sodium Acetate in 20% Ethanol

4 to 30Â°C, 20% Ethanol

2-8C

4Â°C to 8Â°C

2 to 8Â°C, 20% Ethanol

2Â°Câ€“8Â°C, 20% ethanol

4 to 30Â°C

4 to 8Â°C, 100% Isopropanol

4 to 8Â°C, 20% Ethanol

4 to 30Â°C, 0.15% Kathon CG/ICP Biocide

4 to 30Â°C, dry resins. Used resins 4 to 8 Â°C in 20% Ethanol or 0.01 M NaOH

15Â° to 30Â° C

2 to 8Â°C, 20% Ethanol (alternative storage solution 2% benzyl alcohol)

4 to 30Â°C, 20% Ethanol + 0.2 M Sodium Acetate

4Â°C to 30Â°C, 20% Ethanol

2 to 8Â°C, 0.05 M Sodium Acetate, pH 4.0 in 20% Ethanol

2Â°C to 8Â°C in 20% ethanol

Suitability

Autosampler compatibility:Agilent Agilent 1050/1090A Agilent 1100/1200 Agilent 7673A, 7683 Agilent 5890/7985A/6890Hitachi AS-1000, AS-2000, AS-4000 L7200/L7250LEAP Technologies CTC LC PAL, GC PAL CombiPAL HTC PAL/HTS PALPerkinElmer Autosystem/AS-2000/XL

Surface Area

100 m²/g

100 m 2 /g

500 m 2 /g

250-350 m 2 /g

530 m 2 /g

22 m 2 /g

320 m 2 /g

450 m 2 /g

~500 m 2 /g

500 m 2 /g (approx.)

800 m 2 /g

289 m 2 /g

450 m 2 /g

480 m 2 /g

300 m²/g

300 m 2 /g

470-530 m 2 /g

170 m 2 /g

=480 m 2 /g (approx.)

200 m 2 /g

430-530 m 2 /g

475 m 2 /g

80 m 2 /g

450 m²/g

Identification

Pass Test

Synonym

DMSO

Thread Size

10-425

20 mm

9 mm

Type of ion exchanger

Strong anion exchanger (quaternary ammonium)

Strong cation exchanger (methyl sulfonate)

Voltage

100-120/220-240 VAC

100 to 120/220 to 240 VAC

Volume

5-20 ml

0.5 mL

2-6 ml

50 µL

1 mL

100-500 Âµl

22 mL

3 mL

50 mL

6 mL

2.5-100 µL

2 mL

25 mL

400 Âµl - 2 ml

Volume Metric Working

1.8 mL

Wetted Materials

Polyetheretherketone (PEEK)/Polytetrafluoroethene (PTFE)

Ethylenetetra fluoroethylene (ETFE)

Polyetheretherketone (PEEK)

Polyetheretherketone (PEEK)/Polytetrafluoroethylene (PTFE)

Polyetheretherketone (PEEK)/ Fluorinated Ethylene Propylene (FEP)/ PolyChloroTriFluoroEthylene (PCTFE)

Polyetheretherketone (PEEK)/Ethylenetetrafluoroethylene (ETFE)

Polyetheretherketone (PEEK)/Fluoroethenepropene (FEP)/Ethylenetetrafluoroethylene (ETFE)

Ionic Capacity

0.18-0.24 mmol Cl^-/ml medium

0.18-0.25 mmol H⁺/ml medium

0.09-0.13 mmol H⁺/ml medium

0.11â€“0.16 mmol (Cl^-)/mL resin

Ligand

Recombinant GammaBind G type 3 lacking albumin-binding region

Ligand Density

3 mg GammaBind G, type 3/ml medium

~ 5 mg/mL resin

2 mg Protein G/ml medium

6 mg rProtein A/ml medium

Linear Formula

MgO3Si

(CH₃)₂SO

(C10H12 · C10H10 · C8H8)x

Matrix

6% Cross-Linked Agarose

Highly cross-linked agarose with dextran surface extender

Matrix

Composite of cross-linked agarose

Highly cross-linked agarose, spherical

Hydroxypropylated, cross-linked dextran

Composite of cross-linked agarose and dextran

Highly cross-linked 4% agarose

Cross-linked agarose, 6%

Highly cross-linked agarose, 6%

Highly crossed-linked agarose, 6%

Agarose, 4%

cross-linked agarose, 6%, spherical

cross-linked, 6% agarose particles

Highly cross-linked agarose

Rigid, cross-linked agarose, spherical

cross-linked agarose, 4%, spherical

Cross-linked dextran

InChIKey

IAZDPXIOMUYVGZ-UHFFFAOYSA-N

Length

2 m

Length English Needle

2 in.

Length Metric

250 mm

50 mm

Material Septa

PTFE/Silicone/PTFE

PTFE/Silicone

Max Pressure

11600 psi (800 bar)

17400 psi (1200 bar)

4500 psi (310 bar)

Injection valve

1/16â€ PEEK valve 6 port 2 position with 0.25 mm i.d. bore

Injections per vial/well

Max. 9

Ion exchanger

Q (anion exchanger)

S (cation exchanger)

Liner Material

PTFE/Silicone

Molecular Weight

0.0

60.08

78.129

100.20

100.39

No per Pack

100

Ligand Concentration

~45 Âµmol phenyl/mL resin

Operating Flow Rate, Max

0.15 mL/min, water at room temperature;
0.075 mL/min, 20% ethanol or 10% glycerol at room temperature;
0.075 mL/min water at low temperature;
0.035 mL/min 20% ethanol or 10% glycerol at low temperature

1.0 mL/min

2.6 mL/min

Operating pH

2 - 7.5

3.5 - 7.0

3.8 - 6.8

2 - 8

1 - 9

2 - 9

0 - 14

Operating Temperature

4Â°C-35Â°C

<40Â°C

Maximum pressure over packed bed

4.0 MPa (40 bar, 580 psi)

Osmolality

< 25 mOsm/kg

Output

4 W

Pack Size

Packaging Layout

1 kg in poly bottle

100, 500 g in poly bottle

1, 6x1, 2.5 kg in poly bottle

Fibre case

1 ft3 in fiber drum

25, 500 g in poly bottle

2.5, 5, 25 kg in fiber drum

Partical Size Dry

40 Âµm-120 Âµm

18 Âµm-111 Âµm

50 Âµm-150 Âµm

pH ligand fully charged

Above 6

Below 9

Entire pH range

Pictogram

GHS07

GHS08

Preslit

Yes

Pressure/Flow Specification

150 cm/h (at < 3 bar, 25Â°C, 10 cm bed height)

Base matrix: 250-400 cm/h, 100 kPa, XK 50/60 column, bed height 25 cm

300 kPa at 600 cm/h, 1 m diameter column, 20 cm bed height

400-700 cm/h, 100 kPa, XK 50/30 column, bed height 15 cm

300-600 cm/h, 100 kPa, XK 50/30 column, bed height 15 cm

25-45 cm/h, pressure drop cm H2O/bed height=2, beh height 30 cm, 2.6 cm i.d.

base matrix 150-250 cm/h, 100 kPa, XK 50/60 column, bed height 25 cm

Product Line

Supelclean ENVI

Easy Spray

Pierce

No per Pack

100

Operating Pressure Max

20 MPa (2900 psi)

10 bar (1 MPa)

4.1 bar (60 psi)

5 MPa (725 psi)

Injection volume1

Programmable from 0 to 5000 ÂµL 1 ÂµL increments. Maximum injection volume depends on installed sample loop and injection mode

Particle Shape

Spherical

Particle Size in Methanol Min

ParticleSize

5 µm

3 µm

pH Stability Long Term

43843

Power Consumption

300 VA

800 VA

Power requirements

95 to 240 Volt AC Â± 10%; 50 to 60 Hz; 200 VA

Material

Brass

Multiple

Metal Ion Capacity

approx. 15 Âµmol Ni²⁺/ml medium

54 to 70 Âµmol Ni²⁺/ml medium

~15 Âµmol Ni²⁺/ml medium

Properties

Ficoll-Paque PLUS is a sterile, ready-to-use density media containing Ficoll PM400, sodium diatrizoate and disodium calcium EDTA. The density has been optimized for the isolation of human lymphocytes from peripheral blood.

Solution

Ficoll-Paque PREMIUM products constitute a range of sterile, ready-to-use density media containing Ficoll PM400, sodium diatrizoate and disodium calcium EDTA in water for injection (WFI). The densities and osmolalities of the different products have been

Reactivity and Stability

The reactivity and stability of Ficoll PM400 are determined by its hydroxyl groups and the glycosidic bonds in the sucrose residues. It is stable in alkaline and neutral solutions. At pH values lower than 3, it is rapidly hydrolyzed, especially at elevate

IUPAC Name

methylsulfinylmethane

Septum

Red PTFE/White Silicone

Relative Viscosity

5 Î·r at 20Â°C: 10% (w/v) 20 Î·r at 20Â°C: 20% (w/v) 60 Î·r at 20Â°C : 30% (w/v 180 Î·r at 20Â°C : 40% (w/v) 600 Î·r at 20Â°C : 50% (w/v)

Shape

Round

S-Codes

26-36

Sample Loading Volume

Determined by desired degree of resolution [Adsorption Mode], ~2% total bed volume [Molecular Sizing], ~1% total bed volume [Partition Mode]

Sample Volume

600 Âµl

<= 13 ml

4 to 50 ÂµL

25 to 500 ÂµL

< 0.5 mL

< 5 mL

<= 1.5 ml

<= 15 ml

<= 5 ml

Needle Point Style

Blunt

p H

4 to 13

7.5 pH

2 to 8

2.5 to 7

Packaging

Amber Glass

Packing Material

Spherical, Nanopolymer Hybrid Silica

Spherical, Fully Porous, Ultrapure Silica

Percent Purity

≥99.9%

Solubility Information

Solubility aq. soln.: insoluble.

Multiple Sample Injection

Yes, up to 7 samples

Upgradeable to 5 samples

Multiple Wavelength Detection

Up to 3 wavelengths

Yes, up to 3 wavelengths

Fixed wavelength

7.0 to 7.4

pH Range

5.5â€“7.5

8.5â€“9.5

8.9â€“9.9

pH Stability Cleaning-in-Place (CIP)

0 to 14

1 to 14

pH stability, operational

3â€“10

2â€“10

pH 6 to 10

2â€“12

3 to 12

3â€“13

2â€“9

4â€“13

4â€“9

2â€“13

4â€“12

2 to 12

3â€“12

3â€“9

Physical Form

Colloidal solution of silica coated with polyvinylpyrrolidone (PVP)

Colloidal solution of silica particles coated with silane

Spray-dried powder

Liquid

Physical State

liquidSuspension

Liquid

solid

Storage Conditions

4â€“30Â°C

4ËšC to 30ËšC, 20% ethanol

At room temperature. Precipitation can occur at low temperature.

4 - 30Â°C

Store at room temperature.

Molecular Formula

O2Si

C2H6OS

Storage conditions1

-25 Â°C to 60 Â°C

Swelling factor

~1.7

Number of Ports

pH Stability Short Term

1â€“14

Quality

monodispersed

with moisture indicator free of heavy metals

dry

with fluorescent indicator 254 nm

Particle Size

24-44 Âµm

60 Î¼m-160 Î¼m

24 Âµm-44 Âµm

60 Âµm-165 Âµm

2 µm

45 Âµm-165 Âµm

45 Î¼m-165 Î¼m

Pressure/flow characteristics

150-250 cm/h at <0.1MPa in a XK 50/60 column with 5 cm diameter and 25 cm bed height (at 20Â°C using buffers with the same viscosity as water)

Pressure/flow characteristics: 150-250 cm/h at <0.1 MPa in a XK 50/60 column with 5 cm diameter and 25 cm bed height (at 20â°C using buffers with the same viscosity as water).

250-400 cm/h at <0.1 MPa in a XK 50/60 column with 5 cm diameter and 25 cm bed height (at 20â°C using buffers with the same viscosity as water).

Resin Type

MabSelect

Capto

Sepharose Fast Flow

Sepharose High Performance

pH Monitoring

0â€“14

0 to 14 (optional)

Operating temperature1

4 Â°C to 40 Â°C; indoor use only

Syringe volume

500 ÂµL standard; 2500 ÂµL optional

Synonyms

QuEChERS; QuEChERS

Tedlar(R) Gas Sampling Bag

XAD16N

TLC cards Silica gel

Activated magnesium silicate; Magnesium silicate

QuEChERS

Silica gel

Safety Certifications

2006/42/EC (MD), 2004/108/EC (EMC), 1999/5/EC (R&TTE)

Sampler capacity

Vial rack with 108 positions for (1.5 mL). Microplates according to SBS standards. 96-well (deep-well and standard) as well as 384-well

Sealing

Heat-fused

Septum

None

ProductLine

Acclaim

Protection Class

IP 21

Recommended maximum operational flow velocity

300 cm/h

R-CODES

48/20

36/37/38

PoreSize

300 Å

Residue After Evaporation

5ppm max.

RIDADR

NONH for all modes of transport

>1600 C

Relative Humidity

20% to 95% (noncondensing)

20%-95% (non condensing)

RTECS Number

VV7315000

Noper Pack

100

Purity

>=99%

Refractive Index

1.4770 to 1.4800 (at 25°C)

Theoretical Plates

5000 m-1

> 48 000 m^-1

> 13000 m-1

> 43 000 m^-1

> 38 000 m^-1

Safety certifications1

CE, cMETus, EU ROHS, China ROHS

Type

Ferrule

Analytical Column

SPE Column

Liquid Chromatography (LC)

HPLC Column

Stationary Phase

C18

Reversed Phase/Anion Exchange/Cation Exchange

Viscosity

0.35 to 10.0 cP (system pump)

1.98 mPa/s at 25Â°C

Volume Metric

2 mL

2.0 mL

6 mL

Pump Type

Piston pump, metering type

Water

0.04% max.

Sterilization

0.1 Âµm sterile filtered

May be autoclaved at 121Â°C for 20 minutes. Multiple autoclave cycles are possible. However, the responsibility for reuse is with the operator. The device should be protected from cross contamination. An integrity test should be performed after autoclavin

SMILES

CS(=O)C

Typical Pressure Drop Over the Packed Bed

~ 3 MPa

~ 2 MPa

Volume MetricResidual

<170µL

Volume_28

2-6 ml

400 Âµl - 2 ml

5-20 ml

100-500 Âµl

Weight_30

21 kg

WGK

nwg

Surface Area Metric

100 m2/g

PurityGrade Notes

Mobile phase for HPLC applications

Pub Chem CID

679

Purity GradeNotes

Mobile phase for HPLC applications

Relative humidity1

20% to 80% RH

Scale

Lab|Process development

Lab

Lab|Process development|Process

Lab|Process

Recommended Flow Rate

1 ml/min

Solubility

It is delivered as a spray-dried powder and is therefore readily soluble in aqueous media when it is added slowly with concomitant stirring. Any lumps formed during this procedure will dissolve fairly quickly. Concentrations up to 50% (w/v) can easily be

Temperature

60°C

Total Time of Preparation

< 30 min/6 preps

Support System

Polypropylene (PP)

USP Type

Volume Metric

4 mL

Volume Metric Total

2 mL

Weight

Up to 53

Width

860

215

535

U SPType

UV Wavelength

190-700 nm

190 to 700 nm

280 nm

Vapor Pressure

0.55mbar at 20Â°C

17 mmHg ( 20 °C)

System

Sepax C-Pro|Sefia|Sepax 2

Wetted Part

yes

Vent

On inlet

Volume MetricTotal

2 mL

Vapor Density

<1 (vs air)

Viscosity Max

Titratable Acid

0.001mEq/g max.

Volume Metric Usable

1.5 mL

Volume MetricUsable

4 mL

1.5 mL

Wetted part1

PEEK, PTFE, Tefzelâ„¢, Vespelâ„¢, PCTFE, glass. Needle coated with silica on stainless steel SS316 (inside and outside)

Volume Metric Residual

<170µL

Total binding capacity

~50 mg hIgG/mL resin

Volume English

1 dr.

VialType

11 mm Crimp Top Vial

9 mm Target DP Vial

If you are viewing this page as a nonregistered user, the price(s) displayed is list price. To view your customer-specific pricing, log in or become a registered user here.