96-Format, HighBase Rack, Compatible with 0.48ml 2D-Coded Tube, 96-format, Internal Thread

96-Format, HighBase Rack; 10 racks; Compatible rack for 0.48ml 2D-Coded Tube, 96-format, Internal Thread. The 0.48ml 2D-Coded Tube, 96-format, Internal Thread provides a lifelong and secure chain of custody for samples in biobanks, compound libraries and a broad range of biological and chemical stores, including cryogenic storage.

Code readable without removing tubes from racks
Suitable for cryogenic storage
Available in 96-well format SBS racks or bulk
Sealable with screw caps/TPE septum caps

Designed and developed with broad compatibility in mind, the tubes perform without compromise in conjunction with automated barcode reading, capping and sample management systems from Azenta Life Sciences and all other industry-recognized manufacturers. Provides a lifelong and secure chain of custody for samples in biobanks, compound libraries and a broad range of biological and chemical stores, including cryogenic storage.

Each tube carries a unique and permanent high-contrast 2D code tube identifier on the base of the tube readable in frost or condensation conditions, or when damaged. Manufactured from high-quality virgin polypropylene.

Secure Sample Storage & Tracking:
Next Generation manufacturing techniques: clear with black area for own marking
Made from high-quality virgin PP
Permanently laser etched 2D code on base, ensuring a permanent link between sample and data
2D codes readable without removing tubes from racks
High contrast 2D codes are more reliably readable in frost or condensation conditions
100% quality control, each tube is tested to ensure both readability and uniqueness
Leak tested to ensure sample security
Suitable for sealing with screw caps or TPE septum caps
Suitable for cryogenic storage; Not for use in liquid phase nitrogen

Screw Caps:
Co-molded screw caps for internal thread tubes eliminate the possibility of over tightening
Co-molded caps eliminate the failures common in caps using silicon O-rings
Improved internal thread provides a more secure seal when using screw caps

TPE septum Caps:
A cost effective sealing option for samples that are only accessed occasionally
Septum caps are supplied in 96-format back mats to facilitate automation

96 format SBS Racks:
TwistLock: prevents tubes rotating within the rack to enable automated capping and de-capping of screw caps; provided as standard with the option available to remove
TubeLock: prevents tubes from falling out, even in lidless racks; useful in manual workflows; activate by applying pressure on the tube top, clicking it into place; tubes can be ordered pre-locked or non-locked LidLock: enables racks to withstand a 1m drop test for added sample security
Automatic rack orientation: a unique 2D code rack identifier readable at the same time as the tube 2D code; for automatic rack orientation and secure sample tracking
Direct laser etching: a cutout window on the rack sides allow the linear barcode to be read more easily; linear barcodes can be laser etched directly onto racks

Cryo Racks:
136.2mm x 136.2mm PC cryobox rack option available for cryogenic sample storage, holding 196 tubes in 14x14 array
Open bottom for 2D code decoding on Azenta Life Sciences Camera-Based Full Rack Barcode Readers
Can be supplied with a unique 2D code identifier which can be read at the same time as the tube 2D code, for more secure sample tracking. Max. fill volume (21°C with screw cap): 0.58ml
Max. fill volume (21°C with septum cap): 0.68ml
Max. working volume (frozen with screw cap): 0.48ml
Max. working volume (frozen with septum cap): 572µl
Max. working volume (with screw cap): 482µl
Max. working volume (with septum cap): 572µl
Tube height (without cap): 26.4mm
Tube height (with screw cap): 34.7mm
Tube height (with septum cap): 27.6mm
Internal height to the bottom of the tube: 25.3mm
Inner diameter: 6.8mm
Outer diameter with cap: 8.6mm
Center to center: 9.0mm
Minimum temperature (with screw cap): -196°C
Minimum temperature (with septum cap): -80°C
Tube height in rack (with screw cap): 36.2mm
Tube height in rack (with septum cap): 35.2mm
Overall rack height (including lid & screw cap): 44.9mm
Overall rack height (including lid & septum cap): 43.9mm
2D code: base