96-Format, LowBase Rack with TubeLock & Lid, Compatible with 0.3ml Dual-coded Tube, 96-format, Internal Thread

96-Format, LowBase Rack, with TubeLock and standard profile non-locking lid; 10 racks; Compatible rack for 0.3ml Dual-coded Tube, 96-format, Internal Thread. The 0.3ml Dual-coded Tube, 96-format, Internal Thread features a 2D code and human readable number on tube base, allowing compatibility with low throughput manual, semi-automated or fully automated workflows on integrated platforms.

Code readable without removing tubes from racks
Suitable for cryogenic storage
Available in 96-well format SBS racks or bulk
Sealable with TPE/auto friendly screw caps

Designed and developed with broad compatibility in mind, the tubes perform without compromise in conjunction with automated barcode reading, capping and sample management systems from Azenta Life Sciences and all other industry-recognized manufacturers. Provides a lifelong and secure chain of custody for samples in biobanks, compound libraries and a broad range of biological and chemical stores, including cryogenic storage.

Developed to exceed the demands of sample security, management and tracking in modern high density storage applications. Each tube features a permanently laser etched 2D code and human readable number on tube base, allowing compatibility with low throughput manual, semi-automated or fully automated workflows on integrated platforms.

Secure Sample Storage & Tracking:
Next Generation manufacturing techniques
Made from high-quality virgin PP
Permanently laser etched 2D code on base and human readable number on the base, ensuring a permanent link between sample and data
2D codes readable without removing tubes from racks
High contrast 2D codes are more reliably readable in frost or condensation conditions
100% quality control, each tube is tested to ensure both readability and uniqueness
Leak tested to ensure sample security
Suitable for sealing with screw caps or TPE septum caps
Suitable for cryogenic storage; Not for use in liquid phase nitrogen

Screw Caps:
Automation friendly co-molded screw caps for internal thread tubes eliminate the possibility of over tightening
Co-molded caps eliminate the failures in caps using a silicone O-ring
Double start thread engages in a maximum rotation of 180°, facilitating automation

TPE Septum Caps:
A cost effective sealing option for samples that are only accessed occasionally
Septum caps are supplied in 96-format back mats to facilitate automation

96 format SBS Racks:
TwistLock: prevents tubes rotating within the rack to enable automated capping and de-capping of screw caps; provided as standard with the option available to remove
TubeLock: prevents tubes from falling out, even in lidless racks; useful in manual workflows; activate by applying pressure on the tube top, clicking it into place; tubes can be ordered pre-locked or non-locked
LidLock: enables racks to withstand a 1m drop test for added sample security
Automatic rack orientation: a unique 2D code rack identifier readable at the same time as the tube 2D code; for automatic rack orientation and secure sample tracking
Direct laser etching: a cutout window on the rack sides allow the linear barcode to be read more easily; linear barcodes can be laser etched directly onto racks

Cryo Racks:
136.2mm x 136.2mm PC cryobox rack option available for cryogenic sample storage, holding 196 tubes in 14x14 array
Open bottom for 2D code decoding on Azenta Life Sciences Camera-Based Full Rack Barcode Readers
Can be supplied with a unique 2D code identifier which can be read at the same time as the tube 2D code, for more secure sample tracking. Max. working volume: 0.33ml
Tube height: 21.0mm
Tube height with cap: 29.3mm
Inner diameter: 6.8mm
Outer diameter with cap: 8.7Xmm
Center to center: 9.0mm
Minimum temperature: -196°C
Tube height in rack: 29.5mm
Overall rack height (including lid): 33.1mm